Usb Universal Controller Driver
Usb Universal Controller Driver Rating: 8,7/10 1059 votes
- Intel Usb Universal Host Controller Driver Download
- Usb Universal Serial Bus Controller Driver Windows 8.1
- Universal Usb Controller Driver Download
World's most popular driver download site. Intel Controlador USB (Universal Serial Bus) Free Driver Download for Windows 7 (1995861) - IntelRUSB3.0eXtensibleHostControllerDriver4.0.6.60.zip Driver Guide. Apr 16, 2014 I recently installed a new motherboard into my computer (ASRock z77 Extreme4) and am receiving messages that say to install the driver for 'Universal Serial Bus (USB) Controller' Any idea what this might be, or where I could install it?
-->This reference section describes the driver programming interfaces that are included in the Windows Driver Kit (WDK). The programming interfaces are used for developing drivers that interact with USB devices, host controllers, connectors. These include export functions that the drivers can call, callback routines that the driver can implement, I/O requests that the driver can send to the Microsoft-provided USB driver stack, and various data structures that are used in those requests.
For the programming guide, see Universal Serial Bus (USB).
Common USB client driver reference
A Windows Driver Model (WDM)-based USB client driver can call functions to communicate with the Microsoft-provided USB driver stack. These functions are defined in Usbdlib.h and the client driver requires the Usbdex.lib library. The library gets loaded and statically linked to the client driver module when it is built. A client driver that calls these routines can run on Windows Vista and later versions of Windows.
Programming Guide
Intel Usb Universal Host Controller Driver Download
Developing Windows client drivers for USB devices.
Headers
Deprecated functions, IOCTL requests for all USB drivers
These functions have been deprecated.
Do not use.
- USBD_CalculateUsbBandwidth
- USBD_CreateConfigurationRequest
- USBD_Debug_LogEntry
- USBD_GetUSBDIVersion
- USBD_ParseConfigurationDescriptor
- USBD_QueryBusTime
- USBD_RegisterHcFilter
Usb Universal Serial Bus Controller Driver Windows 8.1
These I/O requests have been deprecated or reserved for internal use.
USB client drivers must not use these I/O requests:
- IOCTL_USB_DIAG_IGNORE_HUBS_OFF
- IOCTL_USB_DIAG_IGNORE_HUBS_ON
- IOCTL_USB_DIAGNOSTIC_MODE_OFF
- IOCTL_USB_DIAGNOSTIC_MODE_ON
- IOCTL_USB_GET_HUB_CAPABILITIES
- IOCTL_USB_HCD_DISABLE_PORT
- IOCTL_USB_HCD_ENABLE_PORT
- IOCTL_USB_HCD_GET_STATS_1
- IOCTL_USB_HCD_GET_STATS_2
- IOCTL_USB_RESET_HUB
Dual-role controller driver reference
A USB driver for a dual-role controller can behave as a host controller or a function controller depending on the hardware to which it is connected. These controllers are common on mobile devices and allow for connections to PCs, as well as USB peripherals like keyboards and mice. A mobile device can behave as a peripheral when it is connected to a PC, allowing you to transfer files between your PC and the mobile device. In that scenario, the controller on the device operates in the function role. Conversely, the controller can operate in the host role when connected to USB peripherals like storage drives, keyboard, mice.
One of the main responsibilities of a driver for a dual-role controller is to switch between those two roles, tearing down the previous role's device node and loading the device node for the new role. When writing the driver, use the WDF class extension-client driver model. For more information about the WDF class extension-client driver model, see Ursdevice.h.
Programming Guide
For information about enabling a Windows system for USB dual-role support, see USB Dual Role Driver Stack Architecture.
Headers
Emulated host controller driver reference
Windows drivers can present non-USB devices as emulated USB devices. By using the WDF class extension-client driver model, you can write a driver that translates USB-level constructs (reset, data transfers) to the actual underlying bus by using the hardware’s interface. The class extension and the client driver represent an emulated host controller with a root hub that is capable of presenting an attached device to the system as an USB device.
- USB device emulation class extension (UdeCx). This is an in-box driver included Windows 10.
- The client driver is written by an IHV/OEM. This driver is referred to as the UDE client driver.
The driver pair loads as the FDO in the host controller device stack. The UDE client driver communicates with Udecx by using a set of methods and event callback functions to handle device requests and notify the class extension about various events.
Programming Guide
Developing Windows drivers for emulated USB devices (UDE).
Use Fluid Grid Layout designed for cross-platform compatibility to create adaptive layouts. Work faster and more efficiently as you develop projects using clean, industry-standard code for a wide range of devices and computers. Review designs with Multiscreen Preview before publishing.Fluid Grid LayoutCreate cross-platform and cross-browser-compatible web designs using the CSS3-based Fluid Grid Layout system.
Headers
Function class driver reference
A USB function class driver implements the functionality of a specific interface (or group of interfaces) on the USB device. The class driver handle requests issued by user mode services, or it can forwards requests to USB function class extension (UFX) and its function client driver. Certain class drivers are included in Windows, such as MTP and IpOverUsb. Windows also provides a generic kernel-mode class driver, Generic USBFN (GenericUSBFn.sys). If a particular interface or functionality is not provided by a system-supplied driver, you might need write a function class driver. The class driver may be implemented as a kernel-mode driver by using Windows Driver Frameworks (WDF). Alternatively, you may implement it as a user-mode service. In that case, your class driver must be paired with the system-supplied class driver, Generic USBFN. For example, the MTP class driver runs as a user-mode service that transferring files to and from the device.
Headers
USB function controller client driver reference
The USB function client driver is responsible for implementing a function controller-specific operations. The client driver communicates with the USB function class extension (UFX) module to handle endpoint data transfers, USB device state changes (reset, suspend, resume), attach/detach detection, port/charger detection. The client driver is also responsible for handling power management, and PnP events.
Programming Guide
Headers
Filter driver for supporting USB chargers
Write a filter driver that supports detection of chargers, if the function controller uses the in-box Synopsys and ChipIdea drivers. If you are writing a client driver for a proprietary function controller, charger/attach detection is integrated in the client driver by implementing EVT_UFX_DEVICE_PROPRIETARY_CHARGER_SET_PROPERTY, EVT_UFX_DEVICE_PROPRIETARY_CHARGER_RESET, and EVT_UFX_DEVICE_DETECT_PROPRIETARY_CHARGER.
Universal Usb Controller Driver Download
Programming Guide
Headers
Host controller driver reference
The USB host controller extension is a system-supplied extension to the Kernel-Mode Driver Framework (KMDF). Within the Microsoft USB Driver Stack Architecture, UCX provides functionality to assist a host controller client driver in managing a USB host controller device. The client driver handles hardware operations and events, power management, and PnP events. UCX serves as an abstracted interface to the rest of the Microsoft USB 3.0 stack, queues requests to the client driver, and performs other tasks.
If you are developing an xHCI host controller that is not compliant with the specification or developing a custom non-xHCI hardware (such as a virtual host controller), you can write a host controller driver that communicates with the UCX class extension.
Programming Guide
Headers
Type-C driver reference
Windows 10 introduces support for the new USB connector: USB Type-C. You can write a driver for these scenarios:
| Scenario | Headers | Programming Guide |
|---|---|---|
| If your USB Type-C hardware has the capability of handling the power delivery (PD) state machine. | Write a USB Type-C connector driver | |
| If your driver wants to participate in the policy decisions for USB Type-C connectors. | Usbpmapi.h | Write a USB Type-C Policy Manager client driver |
| If your hardware does not support PD. | Write a USB Type-C port controller driver. | |
| Write a UCSI client driver |
IOCTLs
| Title | Description |
|---|---|
| IOCTL_GET_HCD_DRIVERKEY_NAME | The IOCTL_GET_HCD_DRIVERKEY_NAME I/O control request retrieves the driver key name in the registry for a USB host controller driver. |
| IOCTL_INTERNAL_USB_CYCLE_PORT | The IOCTL_INTERNAL_USB_CYCLE_PORT I/O request simulates a device unplug and replug on the port associated with the PDO. |
| IOCTL_INTERNAL_USB_ENABLE_PORT | The IOCTL_INTERNAL_USB_ENABLE_PORT IOCTL has been deprecated. Do not use. |
| IOCTL_INTERNAL_USB_GET_BUS_INFO | The IOCTL_INTERNAL_USB_GET_BUS_INFO I/O request queries the bus driver for certain bus information. |
| IOCTL_INTERNAL_USB_GET_BUSGUID_INFO | The IOCTL_INTERNAL_USB_GET_BUSGUID_INFO IOCTL has been deprecated. Do not use. |
| IOCTL_INTERNAL_USB_GET_CONTROLLER_NAME | The IOCTL_INTERNAL_USB_GET_CONTROLLER_NAME I/O request queries the bus driver for the device name of the USB host controller. |
| IOCTL_INTERNAL_USB_GET_DEVICE_CONFIG_INFO | The IOCTL_INTERNAL_USB_GET_DEVICE_CONFIG_INFO I/O request returns information about a USB device and the hub it is attached to. |
| IOCTL_INTERNAL_USB_GET_DEVICE_HANDLE | The IOCTL_INTERNAL_USB_GET_DEVICE_HANDLE IOCTL is used by the USB hub driver. Do not use. |
| IOCTL_INTERNAL_USB_GET_DEVICE_HANDLE_EX | The IOCTL_INTERNAL_USB_GET_DEVICE_HANDLE_EX IOCTL is used by the USB hub driver. Do not use. |
| IOCTL_INTERNAL_USB_GET_HUB_COUNT | The IOCTL_INTERNAL_USB_GET_HUB_COUNT IOCTL is used by the USB hub driver. Do not use. |
| IOCTL_INTERNAL_USB_GET_HUB_NAME | The IOCTL_INTERNAL_USB_GET_HUB_NAME I/O request is used by drivers to retrieve the UNICODE symbolic name for the target PDO if the PDO is for a hub. |
| IOCTL_INTERNAL_USB_GET_PARENT_HUB_INFO | The IOCTL_INTERNAL_USB_GET_PARENT_HUB_INFO is used by the USB hub driver. Do not use. |
| IOCTL_INTERNAL_USB_GET_PORT_STATUS | The IOCTL_INTERNAL_USB_GET_PORT_STATUS I/O request queries the status of the PDO. IOCTL_INTERNAL_USB_GET_PORT_STATUS is a kernel-mode I/O control request. This request targets the USB hub PDO. This IOCTL must be sent at IRQL = PASSIVE_LEVEL. |
| IOCTL_INTERNAL_USB_GET_ROOTHUB_PDO | The IOCTL_INTERNAL_USB_GET_ROOTHUB_PDO IOCTL is used by the USB hub driver. Do not use. |
| IOCTL_INTERNAL_USB_GET_TOPOLOGY_ADDRESS | The IOCTL_INTERNAL_USB_GET_TOPOLOGY_ADDRESS I/O request returns information about the host controller the USB device is attached to, and the device's location in the USB device tree. |
| IOCTL_INTERNAL_USB_GET_TT_DEVICE_HANDLE | The IOCTL_INTERNAL_USB_GET_TT_DEVICE_HANDLE is used by the USB hub driver. Do not use. |
| IOCTL_INTERNAL_USB_NOTIFY_IDLE_READY | The IOCTL_INTERNAL_USB_NOTIFY_IDLE_READY IOCTL is used by the USB hub driver. Do not use. |
| IOCTL_INTERNAL_USB_RECORD_FAILURE | The IOCTL_INTERNAL_USB_RECORD_FAILURE IOCTL is used by the USB hub driver. Do not use. |
| IOCTL_INTERNAL_USB_REGISTER_COMPOSITE_DEVICE | The IOCTL_INTERNAL_USB_REGISTER_COMPOSITE_DEVICE I/O request registers the driver of a USB multi-function device (composite driver) with the underlying USB driver stack. |
| IOCTL_INTERNAL_USB_REQ_GLOBAL_RESUME | The IOCTL_INTERNAL_USB_REQ_GLOBAL_RESUME IOCTL is used by the USB hub driver. Do not use. |
| IOCTL_INTERNAL_USB_REQ_GLOBAL_SUSPEND | The IOCTL_INTERNAL_USB_REQ_GLOBAL_SUSPEND IOCTL is used by the USB hub driver. Do not use. |
| IOCTL_INTERNAL_USB_REQUEST_REMOTE_WAKE_NOTIFICATION | The IOCTL_INTERNAL_USB_REQUEST_REMOTE_WAKE_NOTIFICATION I/O request is sent by the driver of a Universal Serial Bus (USB) multi-function device (composite driver) to request remote wake-up notifications from a specific function in the device. |
| IOCTL_INTERNAL_USB_RESET_PORT | The IOCTL_INTERNAL_USB_RESET_PORT I/O control request is used by a driver to reset the upstream port of the device it manages. |
| IOCTL_INTERNAL_USB_SUBMIT_IDLE_NOTIFICATION | The IOCTL_INTERNAL_USB_SUBMIT_IDLE_NOTIFICATION I/O request is used by drivers to inform the USB bus driver that a device is idle and can be suspended. |
| IOCTL_INTERNAL_USB_SUBMIT_URB | The IOCTL_INTERNAL_USB_SUBMIT_URB I/O control request is used by drivers to submit an URB to the bus driver. IOCTL_INTERNAL_USB_SUBMIT_URB is a kernel-mode I/O control request. This request targets the USB hub PDO. |
| IOCTL_INTERNAL_USB_UNREGISTER_COMPOSITE_DEVICE | The IOCTL_INTERNAL_USB_UNREGISTER_COMPOSITE_DEVICE I/O request unregisters the driver of a USB multi-function device (composite driver) and releases all resources that are associated with registration. |
| IOCTL_INTERNAL_USBFN_ACTIVATE_USB_BUS | The USB class driver sends this request to activate the bus so that the driver can prepare to process bus events and handle traffic. |
| IOCTL_INTERNAL_USBFN_BUS_EVENT_NOTIFICATION | The USB class driver sends this request to prepare for notifications received from the USB function class extension (UFX) in response to an event on the bus, such as a change in the port type or a receipt of a non-standard setup packet. |
| IOCTL_INTERNAL_USBFN_CONTROL_STATUS_HANDSHAKE_IN | The class driver sends this request to send a zero-length control status handshake on endpoint 0 in the IN direction. |
| IOCTL_INTERNAL_USBFN_CONTROL_STATUS_HANDSHAKE_OUT | The class driver sends this request to send a zero-length control status handshake on endpoint 0 in the OUT direction. |
| IOCTL_INTERNAL_USBFN_DEACTIVATE_USB_BUS | Do not use. |
| IOCTL_INTERNAL_USBFN_DESCRIPTOR_UPDATE | The USB function class extension sends this request to the client driver to update to the endpoint descriptor for the specified endpoint. |
| IOCTL_INTERNAL_USBFN_GET_CLASS_INFO | The class driver sends this request IO control code to retrieve information about the available pipes for a device, as configured in the registry. |
| IOCTL_INTERNAL_USBFN_GET_INTERFACE_DESCRIPTOR_SET | The class driver sends this request to get the entire USB interface descriptor set for a function on the device. |
| IOCTL_INTERNAL_USBFN_GET_PIPE_STATE | The class driver sends this request to get the stall state of the specified pipe. |
| IOCTL_INTERNAL_USBFN_REGISTER_USB_STRING | The class driver sends this request to register a USB string descriptor. |
| IOCTL_INTERNAL_USBFN_RESERVED | Do not use. |
| IOCTL_INTERNAL_USBFN_SET_PIPE_STATE | The class driver sends this request to set the stall state of the specified USB pipe. |
| IOCTL_INTERNAL_USBFN_SET_POWER_FILTER_EXIT_LPM | Do not use. |
| IOCTL_INTERNAL_USBFN_SET_POWER_FILTER_STATE | Do not use. |
| IOCTL_INTERNAL_USBFN_SIGNAL_REMOTE_WAKEUP | The class driver sends this request to get remote wake-up notifications from endpoints. |
| IOCTL_INTERNAL_USBFN_TRANSFER_IN | The class driver sends this request to initiate a data transfer to the host on the specified pipe. |
| IOCTL_INTERNAL_USBFN_TRANSFER_IN_APPEND_ZERO_PKT | The class driver sends this request to initiate an IN transfer to the specified pipe and appends a zero-length packet to indicate the end of the transfer. |
| IOCTL_INTERNAL_USBFN_TRANSFER_OUT | The class driver sends this request to initiate a data transfer from the host on the specified pipe. |
| IOCTL_UCMTCPCI_PORT_CONTROLLER_ALTERNATE_MODE_ENTERED | Notifies the client driver that an alternate mode is entered so that the driver can perform additional tasks. |
| IOCTL_UCMTCPCI_PORT_CONTROLLER_ALTERNATE_MODE_EXITED | Notifies the client driver that an alternate mode is exited so that the driver can perform additional tasks. |
| IOCTL_UCMTCPCI_PORT_CONTROLLER_DISPLAYPORT_CONFIGURED | Notifies the client driver that the DisplayPort alternate mode on the partner device has been configured with pin assignment so that the driver can perform additional tasks. |
| IOCTL_UCMTCPCI_PORT_CONTROLLER_DISPLAYPORT_DISPLAY_OUT_STATUS_CHANGED | Notifies the client driver that the display out status of the DisplayPort connection has changed so that the driver can perform additional tasks. |
| IOCTL_UCMTCPCI_PORT_CONTROLLER_DISPLAYPORT_HPD_STATUS_CHANGED | Notifies the client driver that the hot-plug detect status of the DisplayPort connection has changed so that the driver can perform additional tasks. |
| IOCTL_UCMTCPCI_PORT_CONTROLLER_GET_CONTROL | Gets the values of all control registers defined as per the Universal Serial Bus Type-C Port Controller Interface Specification. |
| IOCTL_UCMTCPCI_PORT_CONTROLLER_GET_STATUS | Gets values of all status registers as per the Universal Serial Bus Type-C Port Controller Interface Specification. The client driver must retrieve the values of the CC_STATUS, POWER_STATUS, and FAULT_STATUS registers. |
| IOCTL_UCMTCPCI_PORT_CONTROLLER_SET_COMMAND | Sets the value of a command register defined as per the Universal Serial Bus Type-C Port Controller Interface Specification. |
| IOCTL_UCMTCPCI_PORT_CONTROLLER_SET_CONFIG_STANDARD_OUTPUT | Sets the CONFIG_STANDARD_OUTPUT Register defined as per the Universal Serial Bus Type-C Port Controller Interface Specification. |
| IOCTL_UCMTCPCI_PORT_CONTROLLER_SET_CONTROL | Sets the value of a control register defined as per the Universal Serial Bus Type-C Port Controller Interface Specification. |
| IOCTL_UCMTCPCI_PORT_CONTROLLER_SET_MESSAGE_HEADER_INFO | Sets the value of the MESSAGE_HEADER_INFO Register defined as per the Universal Serial Bus Type-C Port Controller Interface Specification. |
| IOCTL_UCMTCPCI_PORT_CONTROLLER_SET_RECEIVE_DETECT | Sets the RECEIVE_DETECT Register defined as per the Universal Serial Bus Type-C Port Controller Interface Specification. |
| IOCTL_UCMTCPCI_PORT_CONTROLLER_SET_TRANSMIT | Sets the TRANSMIT Register defined as per the Universal Serial Bus Type-C Port Controller Interface Specification. |
| IOCTL_UCMTCPCI_PORT_CONTROLLER_SET_TRANSMIT_BUFFER | Sets the TRANSMIT_BUFER Register defined as per the Universal Serial Bus Type-C Port Controller Interface Specification. |
| IOCTL_UCMUCSI_PPM_GET_UCSI_DATA_BLOCK | |
| IOCTL_UCMUCSI_PPM_SEND_UCSI_DATA_BLOCK | Sends a UCSI data block to the client driver. |
| IOCTL_USB_DIAG_IGNORE_HUBS_OFF | The IOCTL_USB_DIAG_IGNORE_HUBS_OFF I/O control has been deprecated. Do not use. |
| IOCTL_USB_DIAG_IGNORE_HUBS_ON | The IOCTL_USB_DIAG_IGNORE_HUBS_ON I/O control has been deprecated. Do not use. |
| IOCTL_USB_DIAGNOSTIC_MODE_OFF | The IOCTL_USB_DIAGNOSTIC_MODE_OFF I/O control has been deprecated. Do not use. |
| IOCTL_USB_DIAGNOSTIC_MODE_ON | The IOCTL_USB_DIAGNOSTIC_MODE_ON I/O control has been deprecated. Do not use. |
| IOCTL_USB_GET_DESCRIPTOR_FROM_NODE_CONNECTION | The IOCTL_USB_GET_DESCRIPTOR_FROM_NODE_CONNECTION I/O control request retrieves one or more descriptors for the device that is associated with the indicated port index.IOCTL_USB_GET_DESCRIPTOR_FROM_NODE_CONNECTION is a user-mode I/O control request. |
| IOCTL_USB_GET_DEVICE_CHARACTERISTICS | The client driver sends this request to determine general characteristics about a USB device, such as maximum send and receive delays for any request. |
| IOCTL_USB_GET_FRAME_NUMBER_AND_QPC_FOR_TIME_SYNC | '.' |
| IOCTL_USB_GET_HUB_CAPABILITIES | The IOCTL_USB_GET_HUB_CAPABILITIES I/O control request retrieves the capabilities of a USB hub. |
| IOCTL_USB_GET_HUB_CAPABILITIES_EX | The IOCTL_USB_GET_HUB_CAPABILITIES_EX I/O control request retrieves the capabilities of a USB hub.IOCTL_USB_GET_HUB_CAPABILITIES_EX is a user-mode I/O control request. This request targets the USB hub device (GUID_DEVINTERFACE_USB_HUB). |
| IOCTL_USB_GET_HUB_INFORMATION_EX | The IOCTL_USB_GET_HUB_INFORMATION_EX I/O control request is sent by an application to retrieve information about a USB hub in a USB_HUB_INFORMATION_EX structure.The request retrieves the highest port number on the hub. |
| IOCTL_USB_GET_NODE_CONNECTION_ATTRIBUTES | The IOCTL_USB_GET_NODE_CONNECTION_ATTRIBUTES I/O control request retrieves the Microsoft-extended port attributes for a specific port. |
| IOCTL_USB_GET_NODE_CONNECTION_DRIVERKEY_NAME | The IOCTL_USB_GET_NODE_CONNECTION_DRIVERKEY_NAME I/O control request retrieves the driver registry key name that is associated with the device that is connected to the indicated port. |
| IOCTL_USB_GET_NODE_CONNECTION_INFORMATION | The IOCTL_USB_GET_NODE_CONNECTION_INFORMATION request retrieves information about the indicated USB port and the device that is attached to the port, if there is one.Client drivers must send this IOCTL at an IRQL of PASSIVE_LEVEL.IOCTL_USB_GET_NODE_CONNECTION_INFORMATION is a user-mode I/O control request. This request targets the USB hub device (GUID_DEVINTERFACE_USB_HUB). Do not send this request to the root hub. |
| IOCTL_USB_GET_NODE_CONNECTION_INFORMATION_EX | The IOCTL_USB_GET_NODE_CONNECTION_INFORMATION_EX request retrieves information about a USB port and the device that is attached to the port, if there is one.Client drivers must send this IOCTL at an IRQL of PASSIVE_LEVEL.IOCTL_USB_GET_NODE_CONNECTION_INFORMATION_EX is a user-mode I/O control request. This request targets the USB hub device (GUID_DEVINTERFACE_USB_HUB). Do not send this request to the root hub. |
| IOCTL_USB_GET_NODE_CONNECTION_INFORMATION_EX_V2 | The IOCTL_USB_GET_NODE_CONNECTION_INFORMATION_EX_V2 I/O control is sent by an application to retrieve information about the protocols that are supported by a particular USB port on a hub. The request also retrieves the speed capability of the port. |
| IOCTL_USB_GET_NODE_CONNECTION_NAME | The IOCTL_USB_GET_NODE_CONNECTION_NAME I/O control request is used with the USB_NODE_CONNECTION_NAME structure to retrieve the symbolic link name of the hub that is attached to the downstream port.IOCTL_USB_GET_NODE_CONNECTION_NAME is a user-mode I/O control request. This request targets the USB hub device (GUID_DEVINTERFACE_USB_HUB). |
| IOCTL_USB_GET_NODE_INFORMATION | The IOCTL_USB_GET_NODE_INFORMATION I/O control request is used with the USB_NODE_INFORMATION structure to retrieve information about a parent device.IOCTL_USB_GET_NODE_INFORMATION is a user-mode I/O control request. |
| IOCTL_USB_GET_PORT_CONNECTOR_PROPERTIES | The IOCTL_USB_GET_PORT_CONNECTOR_PROPERTIES I/O control request is sent by an application to retrieve information about a specific port on a USB hub. |
| IOCTL_USB_GET_ROOT_HUB_NAME | The IOCTL_USB_GET_ROOT_HUB_NAME I/O control request is used with the USB_ROOT_HUB_NAME structure to retrieve the symbolic link name of the root hub.IOCTL_USB_GET_ROOT_HUB_NAME is a user-mode I/O control request. |
| IOCTL_USB_GET_TRANSPORT_CHARACTERISTICS | The client driver sends this request to retrieve the transport characteristics. |
| IOCTL_USB_HCD_DISABLE_PORT | The IOCTL_USB_HCD_DISABLE_PORT IOCTL has been deprecated. Do not use. |
| IOCTL_USB_HCD_ENABLE_PORT | The IOCTL_USB_HCD_ENABLE_PORT IOCTL has been deprecated. Do not use. |
| IOCTL_USB_HCD_GET_STATS_1 | The IOCTL_USB_HCD_GET_STATS_1 IOCTL has been deprecated. Do not use. |
| IOCTL_USB_HCD_GET_STATS_2 | The IOCTL_USB_HCD_GET_STATS_2 IOCTL has been deprecated. Do not use. |
| IOCTL_USB_HUB_CYCLE_PORT | The IOCTL_USB_HUB_CYCLE_PORT I/O control request power-cycles the port that is associated with the PDO that receives the request. |
| IOCTL_USB_NOTIFY_ON_TRANSPORT_CHARACTERISTICS_CHANGE | This request notifies the caller of change in transport characteristics. |
| IOCTL_USB_REGISTER_FOR_TRANSPORT_CHARACTERISTICS_CHANGE | This request registers for notifications about the changes in transport characteristics. |
| IOCTL_USB_RESET_HUB | The IOCTL_USB_RESET_HUB IOCTL is used by the USB driver stack. Do not use. |
| IOCTL_USB_START_TRACKING_FOR_TIME_SYNC | This request registers the caller with USB driver stack for time sync services. |
| IOCTL_USB_STOP_TRACKING_FOR_TIME_SYNC | This request unegisters the caller with USB driver stack for time sync services. |
| IOCTL_USB_UNREGISTER_FOR_TRANSPORT_CHARACTERISTICS_CHANGE | This request unregisters the caller from getting notifications about transport characteristics changes. |
Enumerations
| Title | Description |
|---|---|
| CONTROLLER_TYPE | This enumeration specifies if the USB host controller is an eXtensible Host Controller Interface (xHCI) controller. |
| ENDPOINT_RESET_FLAGS | Defines parameters for a request to reset an endpoint. |
| TRISTATE | The TRISTATE enumeration indicates generic state values for true or false. |
| UCM_CHARGING_STATE | Defines the charging state of a Type-C connector. |
| UCM_PD_CONN_STATE | Defines power delivery (PD) negotiation states of a Type-C port. |
| UCM_PD_POWER_DATA_OBJECT_TYPE | Defines Power Data Object types. |
| UCM_POWER_ROLE | Defines power roles of USB Type-C connected devices. |
| UCM_TYPEC_CURRENT | Defines different Type-C current levels, as defined in the Type-C specification. |
| UCM_TYPEC_OPERATING_MODE | Defines operating modes of a USB Type-C connector. |
| UCM_TYPEC_PARTNER | Defines the state of the Type-C connector. |
| UCMTCPCI_PORT_CONTROLLER_ALERT_TYPE | Defines generic alert values that are used to indicate the type of hardware alert received on the port controller. |
| UCMTCPCI_PORT_CONTROLLER_DISPLAYPORT_DISPLAY_OUT_STATUS | Defines values to determine whether a display out status for a DisplayPort device is enabled. |
| UCMTCPCI_PORT_CONTROLLER_DISPLAYPORT_HPD_STATUS | Defines values to determine whether a DisplayPort device is plugged in. |
| UCMTCPCI_PORT_CONTROLLER_DISPLAYPORT_PIN_ASSIGNMENT | |
| UCMTCPCI_PORT_CONTROLLER_IOCTL | Defines the various device I/O control requests that are sent to the client driver for the port controller. This indicates the type of IOCTL in WPP. |
| UCMUCSI_PPM_IOCTL | Defines I/O control codes handled by the client driver. |
| UCMUCSIFUNCENUM | Defines values for all export functions called by a client driver of a UcmUcsiCx class extension. |
| UCSI_BATTERY_CHARGING_STATUS | See Table 4-42, Offset 64. |
| UCSI_COMMAND | See Table 4-51, Command Code. |
| UCSI_CONNECTOR_PARTNER_FLAGS | Used in the GET_CONNECTOR_STATUS command. See Table 4-42, Offset 21. |
| UCSI_CONNECTOR_PARTNER_TYPE | Used in the GET_CONNECTOR_STATUS command. See Table 4-42, Offset 29. |
| UCSI_GET_ALTERNATE_MODES_RECIPIENT | Used in the GET_ALTERNATE_MODES command. See Table 4-24, Offset 16. |
| UCSI_GET_PDOS_SOURCE_CAPABILITIES_TYPE | Used in the GET_PDOS command. See Table 4-34, Offset 35. |
| UCSI_GET_PDOS_TYPE | Used in the GET_PDOS command. See Table 4-34, Offset 34. |
| UCSI_POWER_DIRECTION | Used in the GET_CONNECTOR_STATUS command. See Table 4-42, Offset 20. |
| UCSI_POWER_DIRECTION_MODE | Used in the GET_CONNECTOR_STATUS command. See Table 4-42, Offset 20. |
| UCSI_POWER_DIRECTION_ROLE | Used in the SET_PDR command. See Table 4-22, Offset 23. |
| UCSI_POWER_OPERATION_MODE | Used in the GET_CONNECTOR_STATUS command. See Table 4-42, Offset 16. |
| UCSI_USB_OPERATION_MODE | Used in the SET_UOR command. See Table 4-18, Offset 23. |
| UCSI_USB_OPERATION_ROLE | Used in the SET_UOR command. See Table 4-20, Offset 23 |
| UCX_CONTROLLER_ENDPOINT_CHARACTERISTIC_PRIORITY | Indicates the priority of endpoints. |
| UCX_CONTROLLER_PARENT_BUS_TYPE | The UCX_CONTROLLER_PARENT_BUS_TYPE enumeration defines the parent bus type. |
| UCX_CONTROLLER_STATE | This enumeration provides values to specify the UCX controller state after a reset. |
| UCX_ENDPOINT_CHARACTERISTIC_TYPE | Defines values that indicates the type of endpoint characteristic. |
| UCX_USBDEVICE_CHARACTERISTIC_TYPE | Defines values that indicates the type of device characteristic. |
| UDECX_ENDPOINT_TYPE | Defines values for endpoint types supported by a virtual USB device. |
| UDECX_ENDPOINTS_CONFIGURE_TYPE | Defines values for endpoint configuration options. |
| UDECX_USB_DEVICE_FUNCTION_POWER | Defines values for function wake capability of a virtual USB 3.0 device. |
| UDECX_USB_DEVICE_SPEED | Defines values for USB device speeds. |
| UDECX_USB_DEVICE_WAKE_SETTING | Defines values for remote wake capability of a virtual USB device. |
| UDECX_WDF_DEVICE_RESET_ACTION | Defines values that indicate the types of reset operation supported by an emulated USB host controller. |
| URS_HARDWARE_EVENT | Defines values for the hardware events that a client driver for a USB dual-role controller can report. |
| URS_HOST_INTERFACE_TYPE | Defines values for the various types of USB host controllers. |
| URS_ROLE | Defines values for roles supported by a USB dual-role controller. |
| USB_CONNECTION_STATUS | The USB_CONNECTION_STATUS enumerator indicates the status of the connection to a device on a USB hub port. |
| USB_CONTROLLER_FLAVOR | The USB_CONTROLLER_FLAVOR enumeration specifies the type of USB host controller. |
| USB_DEVICE_SPEED | The USB_DEVICE_SPEED enumeration defines constants for USB device speeds. |
| USB_HUB_NODE | The USB_HUB_NODE enumerator indicates whether a device is a hub or a composite device. |
| USB_HUB_TYPE | The USB_HUB_TYPE enumeration defines constants that indicate the type of USB hub. The hub type is retrieved by the IOCTL_USB_GET_HUB_INFORMATION_EX I/O control request. |
| USBD_ENDPOINT_OFFLOAD_MODE | Defines values for endpoint offloading options in the USB device or host controller. |
| USBD_PIPE_TYPE | The USBD_PIPE_TYPE enumerator indicates the type of pipe. |
| USBFN_ACTION | Defines special actions UFX should take when the client driver calls the UfxDevicePortDetectCompleteEx function. |
| USBFN_ATTACH_ACTION | Defines the actions that the Universal Serial Bus (USB) function stack takes when a device is attached to a USB port. |
| USBFN_BUS_SPEED | The USBFN_BUS_SPEED enumeration defines possible bus speeds. |
| USBFN_DEVICE_STATE | Defines the Universal Serial Bus (USB) device states for the device/controller. These states correspond to the USB device states as defined in section 9.1 of the USB 2.0 Specification. |
| USBFN_DIRECTION | Defines the USB data transfer direction types. |
| USBFN_EVENT | Defines notifications sent to class drivers. |
| USBFN_PORT_TYPE | Defines the possible port types that can be returned by the client driver during port detection. |
| USBPM_ACCESS_TYPE | Defines the access types for calling Policy Manager functions. |
| USBPM_ASSIGN_POWER_LEVEL_PARAMS_FORMAT | Defines format values used in USBPM_ASSIGN_CONNECTOR_POWER_LEVEL_PARAMS. |
| USBPM_EVENT_TYPE | Defines values for types of events. |
Functions
| Title | Description |
|---|---|
| COMPOSITE_DEVICE_CAPABILITIES_INIT | The COMPOSITE_DEVICE_CAPABILITIES_INIT macro initializes the COMPOSITE_DEVICE_CAPABILITIES structure. |
| EVT_UCM_CONNECTOR_SET_DATA_ROLE | The client driver's implementation of the EVT_UCM_CONNECTOR_SET_DATA_ROLE event callback function that swaps the data role of the connector to the specified role when attached to a partner connector. |
| EVT_UCM_CONNECTOR_SET_POWER_ROLE | The client driver's implementation of the EVT_UCM_CONNECTOR_SET_POWER_ROLE event callback function that sets the power role of the connector to the specified role when attached to a partner connector. |
| EVT_UCX_CONTROLLER_GET_CURRENT_FRAMENUMBER | The client driver's implementation that UCX calls to retrieve the current 32-bit frame number. |
| EVT_UCX_CONTROLLER_GET_FRAME_NUMBER_AND_QPC_FOR_TIME_SYNC | UCX invokes this callback to retrieves the system query performance counter (QPC) value synchronized with the frame and microframe. |
| EVT_UCX_CONTROLLER_GET_TRANSPORT_CHARACTERISTICS | UCX invokes this callback to retrieve the host controller characteristics. |
| EVT_UCX_CONTROLLER_QUERY_USB_CAPABILITY | The client driver's implementation to determine if the controller supports a specific capability. |
| EVT_UCX_CONTROLLER_RESET | The client driver's implementation that UCX calls to reset the controller. |
| EVT_UCX_CONTROLLER_SET_TRANSPORT_CHARACTERISTICS_CHANGE_NOTIFICATION | UCX invokes this callback function to specify its preference in transport characteristics for which the client driver must send notifications when changes occur. |
| EVT_UCX_CONTROLLER_START_TRACKING_FOR_TIME_SYNC | UCX invokes this callback function to the start time tracking functionality in the controller. |
| EVT_UCX_CONTROLLER_STOP_TRACKING_FOR_TIME_SYNC | UCX invokes this callback function to the stop time tracking functionality in the controller. |
| EVT_UCX_CONTROLLER_USBDEVICE_ADD | The client driver's implementation that UCX calls when a new USB device is detected. |
| EVT_UCX_DEFAULT_ENDPOINT_UPDATE | The client driver's implementation that UCX calls with information about the default endpoint. |
| EVT_UCX_ENDPOINT_ABORT | The client driver's implementation that UCX calls to abort the queue associated with the endpoint. |
| EVT_UCX_ENDPOINT_GET_ISOCH_TRANSFER_PATH_DELAYS | UCX invokes this callback function to get information about transfer path delays for an isochronous endpoint. |
| EVT_UCX_ENDPOINT_OK_TO_CANCEL_TRANSFERS | The client driver's implementation that UCX calls to notify the controller driver that it can complete cancelled transfers on the endpoint. |
| EVT_UCX_ENDPOINT_PURGE | The client driver's implementation that completes all outstanding I/O requests on the endpoint. |
| EVT_UCX_ENDPOINT_RESET | The client driver's implementation that UCX calls to reset the controller’s programming for an endpoint. |
| EVT_UCX_ENDPOINT_SET_CHARACTERISTIC | UCX invokes this callback function to set the priority on an endpoint. |
| EVT_UCX_ENDPOINT_START | The client driver's implementation that UCX calls to start the queue associated with the endpoint. |
| EVT_UCX_ENDPOINT_STATIC_STREAMS_ADD | The client driver's implementation that UCX calls to create static streams. |
| EVT_UCX_ENDPOINT_STATIC_STREAMS_DISABLE | The client driver's implementation that UCX calls to release controller resources for all streams for an endpoint. |
| EVT_UCX_ENDPOINT_STATIC_STREAMS_ENABLE | The client driver's implementation that UCX calls to enable the static streams. |
| EVT_UCX_ROOTHUB_CONTROL_URB | The client driver uses this callback type to implement handlers that UCX calls when it receives feature control requests on the USB hub. |
| EVT_UCX_ROOTHUB_GET_20PORT_INFO | The client driver's implementation that UCX calls when it receives a request for information about USB 2.0 ports on the root hub. |
| EVT_UCX_ROOTHUB_GET_30PORT_INFO | The client driver's implementation that UCX calls when it receives a request for information about USB 3.0 ports on the root hub. |
| EVT_UCX_ROOTHUB_GET_INFO | The client driver's implementation that UCX calls when it receives a request for information about the root hub. |
| EVT_UCX_ROOTHUB_INTERRUPT_TX | The client driver's implementation that UCX calls when it receives a request for information about changed ports. |
| EVT_UCX_USBDEVICE_ADDRESS | The client driver's implementation that UCX calls to address the USB device. |
| EVT_UCX_USBDEVICE_DEFAULT_ENDPOINT_ADD | The client driver's implementation that UCX calls to add a new default endpoint for a USB device. |
| EVT_UCX_USBDEVICE_DISABLE | The client driver's implementation that UCX calls to release controller resources associated with the device and its default endpoint. |
| EVT_UCX_USBDEVICE_ENABLE | The client driver's implementation that UCX calls to program information about the device and its default control endpoint into the controller. |
| EVT_UCX_USBDEVICE_ENDPOINT_ADD | The client driver's implementation that UCX calls to add a new endpoint for a USB device. |
| EVT_UCX_USBDEVICE_ENDPOINTS_CONFIGURE | The client driver's implementation that UCX calls to configure endpoints in the controller. |
| EVT_UCX_USBDEVICE_GET_CHARACTERISTIC | UCX invokes this callback to retrieve the device characteristics. |
| EVT_UCX_USBDEVICE_HUB_INFO | The client driver's implementation that UCX calls to retrieve hub properties. |
| EVT_UCX_USBDEVICE_RESET | The client driver's implementation that UCX calls when the port to which the device is attached is reset. |
| EVT_UCX_USBDEVICE_RESUME | UCX invokes this callback function to resume a device from suspend state. |
| EVT_UCX_USBDEVICE_SUSPEND | UCX invokes this callback function to send a device suspend state. |
| EVT_UCX_USBDEVICE_UPDATE | The client driver's implementation that UCX calls to update device properties. |
| EVT_UDECX_USB_DEVICE_D0_ENTRY | The USB device emulation class extension (UdeCx) invokes this callback function when it gets a request to bring the virtual USB device out of a low power state to working state. |
| EVT_UDECX_USB_DEVICE_D0_EXIT | The USB device emulation class extension (UdeCx) invokes this callback function when it gets a request to send the virtual USB device to a low power state. |
| EVT_UDECX_USB_DEVICE_DEFAULT_ENDPOINT_ADD | The USB device emulation class extension (UdeCx) invokes this callback function to request the client driver to create the default control endpoint on the virtual USB device. |
| EVT_UDECX_USB_DEVICE_ENDPOINT_ADD | The USB device emulation class extension (UdeCx) invokes this callback function to request the client driver to create a dynamic endpoint on the virtual USB device. |
| EVT_UDECX_USB_DEVICE_ENDPOINTS_CONFIGURE | The USB device emulation class extension (UdeCx) invokes this callback function to change the configuration by selecting an alternate setting, disabling current endpoints, or adding dynamic endpoints. |
| EVT_UDECX_USB_DEVICE_SET_FUNCTION_SUSPEND_AND_WAKE | The USB device emulation class extension (UdeCx) invokes this callback function when it gets a request to change the function state of the specified interface of the virtual USB 3.0 device. |
| EVT_UDECX_USB_ENDPOINT_PURGE | The USB device emulation class extension (UdeCx) invokes this callback function to stop queuing I/O requests to the endpoint's queue and cancel unprocessed requests. |
| EVT_UDECX_USB_ENDPOINT_RESET | The USB device emulation class extension (UdeCx) invokes this callback function to reset an endpoint of the virtual USB device. |
| EVT_UDECX_USB_ENDPOINT_START | The USB device emulation class extension (UdeCx) invokes this callback function to start processing I/O requests on the specified endpoint of the virtual USB device. |
| EVT_UDECX_WDF_DEVICE_QUERY_USB_CAPABILITY | The UDE client driver's implementation to determine the capabilities that are supported by the emulated USB host controller. |
| EVT_UDECX_WDF_DEVICE_RESET | The UDE client driver's implementation to reset the emulated host controller or the devices attached to it. |
| EVT_UFX_DEVICE_ADDRESSED | The client driver's implementation to assign an address on the function controller. |
| EVT_UFX_DEVICE_CONTROLLER_RESET | The client driver's implementation to reset the function controller to its initial state. |
| EVT_UFX_DEVICE_DEFAULT_ENDPOINT_ADD | The client driver's implementation to create a default control endpoint. |
| EVT_UFX_DEVICE_ENDPOINT_ADD | The client driver's implementation to create a default endpoint object. |
| EVT_UFX_DEVICE_HOST_CONNECT | The client driver's implementation to initiate connection with the host. |
| EVT_UFX_DEVICE_HOST_DISCONNECT | The client driver's implementation to disable the function controller's communication with the host. |
| EVT_UFX_DEVICE_PORT_CHANGE | The client driver's implementation to update the type of the new port to which the USB device is connected. |
| EVT_UFX_DEVICE_PORT_DETECT | The client driver's implementation to initiate port detection. |
| EVT_UFX_DEVICE_PROPRIETARY_CHARGER_DETECT | The client driver's implementation to initiate proprietary charger detection. |
| EVT_UFX_DEVICE_PROPRIETARY_CHARGER_RESET | The client driver's implementation to resets proprietary charger. |
| EVT_UFX_DEVICE_PROPRIETARY_CHARGER_SET_PROPERTY | The client driver's implementation to set charger information that it uses to enable charging over USB. |
| EVT_UFX_DEVICE_REMOTE_WAKEUP_SIGNAL | The client driver's implementation to initiate remote wake-up on the function controller. |
| EVT_UFX_DEVICE_SUPER_SPEED_POWER_FEATURE | The client driver's implementation to set or clear the specified power feature on the function controller. |
| EVT_UFX_DEVICE_TEST_MODE_SET | The client driver's implementation to set the test mode of the function controller. |
| EVT_UFX_DEVICE_TESTHOOK | This IOCTL code is not supported. |
| EVT_UFX_DEVICE_USB_STATE_CHANGE | The client driver's implementation to update the state of the USB device. |
| EVT_URS_DEVICE_FILTER_RESOURCE_REQUIREMENTS | The USB dual-role class extension invokes this callback to allow the client driver to insert the resources from the resource-requirements-list object to resource lists that will be used during the life time of each role. |
| EVT_URS_SET_ROLE | The URS class extension invokes this event callback when it requires the client driver to change the role of the controller. |
| EVT_USBPM_EVENT_CALLBACK | Sends notifications about hub arrival/removal and connector state changes. |
| GET_ISO_URB_SIZE | The GET_ISO_URB_SIZE macro returns the number of bytes required to hold an isochronous transfer request. |
| PUSB_BUSIFFN_ENUM_LOG_ENTRY | This callback function is not supported.The EnumLogEntry routine makes a log entry. |
| PUSB_BUSIFFN_GETUSBDI_VERSION | The GetUSBDIVersion routine returns the USB interface version number and the version number of the USB specification that defines the interface, along with information about host controller capabilities. |
| PUSB_BUSIFFN_IS_DEVICE_HIGH_SPEED | The USB_BUSIFFN_IS_DEVICE_HIGH_SPEED routine returns TRUE if the device is operating at high speed. |
| PUSB_BUSIFFN_QUERY_BUS_INFORMATION | The QueryBusInformation routine gets information about the bus. |
| PUSB_BUSIFFN_QUERY_BUS_TIME | The QueryBusTime function gets the current 32-bit USB frame number. |
| PUSB_BUSIFFN_QUERY_BUS_TIME_EX | The QueryBusTimeEx routine gets the current 32-bit USB micro-frame number. |
| PUSB_BUSIFFN_QUERY_CONTROLLER_TYPE | The QueryControllerType routine gets information about the USB host controller to which the USB device is attached. |
| PUSB_BUSIFFN_SUBMIT_ISO_OUT_URB | This callback function is not supported.The SubmitIsoOutUrb function submits a USB request block (URB) directly to the bus driver without requiring the allocation of an IRP. |
| UCM_CONNECTOR_CONFIG_INIT | Initializes a UCM_CONNECTOR_CONFIG structure. |
| UCM_CONNECTOR_PD_CONFIG_INIT | Initializes a UCM_CONNECTOR_PD_CONFIG structure. |
| UCM_CONNECTOR_PD_CONN_STATE_CHANGED_PARAMS_INIT | Initializes a UCM_CONNECTOR_PD_CONN_STATE_CHANGED_PARAMS structure. |
| UCM_CONNECTOR_TYPEC_ATTACH_PARAMS_INIT | Initializes a UCM_CONNECTOR_TYPEC_ATTACH_PARAMS structure. |
| UCM_CONNECTOR_TYPEC_CONFIG_INIT | Initializes the UCM_CONNECTOR_TYPEC_CONFIG structure. |
| UCM_MANAGER_CONFIG_INIT | Initializes a UCM_MANAGER_CONFIG structure. |
| UCM_PD_POWER_DATA_OBJECT_GET_TYPE | Retrieves the type of Power Data Object from the UCM_PD_POWER_DATA_OBJECT structure. |
| UCM_PD_POWER_DATA_OBJECT_INIT_BATTERY | Initializes a UCM_PD_POWER_DATA_OBJECT structure as a Battery Supply type Power Data Object. |
| UCM_PD_POWER_DATA_OBJECT_INIT_FIXED | Initializes a to the UCM_PD_POWER_DATA_OBJECT for a Fixed Supply type Power Data Object. |
| UCM_PD_POWER_DATA_OBJECT_INIT_ULONG | Initializes a UCM_PD_POWER_DATA_OBJECT structure by interpreting Power Data Object values and sets each field correctly. |
| UCM_PD_POWER_DATA_OBJECT_INIT_VARIABLE_NON_BATTERY | Initializes a UCM_PD_POWER_DATA_OBJECT structure as a Variable Supply Non Battery type Power Data Object. |
| UCM_PD_REQUEST_DATA_OBJECT_INIT_ULONG | Initializes a UCM_PD_REQUEST_DATA_OBJECT structure by interpreting Request Data Object values and sets each field correctly. |
| UcmConnectorChargingStateChanged | Notifies the USB connector manager framework extension (UcmCx) with the updated charging state of the partner connector. |
| UcmConnectorCreate | Creates a connector object. |
| UcmConnectorDataDirectionChanged | Notifies the USB connector manager framework extension (UcmCx) with the new data role of a change in data role. |
| UcmConnectorPdConnectionStateChanged | Notifies the USB connector manager framework extension (UcmCx) with the connection capabilities of the currently negotiated PD contract (if any). |
| UcmConnectorPdPartnerSourceCaps | Notifies the USB connector manager framework extension (UcmCx) with the power source capabilities of the partner connector. |
| UcmConnectorPdSourceCaps | Notifies the USB connector manager framework extension (UcmCx) with the power source capabilities of the connector. |
| UcmConnectorPowerDirectionChanged | Notifies the USB connector manager framework extension (UcmCx) with the new power role of the partner connector. |
| UcmConnectorTypeCAttach | Notifies the USB connector manager framework extension (UcmCx) when a partner connector is attached. |
| UcmConnectorTypeCCurrentAdChanged | Notifies the USB connector manager framework extension (UcmCx) when the specified connector changes the current advertisement. Either the connector changes it (when it is DFP/Source), or the partner changed it (when it is UFP/Sink). |
| UcmConnectorTypeCDetach | Notifies the USB connector manager framework extension (UcmCx) when the partner connector detaches from the specified Type-C connector. |
| UcmInitializeDevice | Initializes the USB connector manager framework extension (UcmCx). |
| UCMTCPCI_DEVICE_CONFIG_INIT | Initializes the UCMTCPCI_DEVICE_CONFIG structure. |
| UCMTCPCI_PORT_CONTROLLER_ALERT_DATA_INIT | Initializes the UCMTCPCI_PORT_CONTROLLER_ALERT_DATA structure. |
| UCMTCPCI_PORT_CONTROLLER_CAPABILITIES_INIT | Initializes the UCMTCPCI_PORT_CONTROLLER_CAPABILITIES structure. |
| UCMTCPCI_PORT_CONTROLLER_CONFIG_INIT | Initializes the UCMTCPCI_PORT_CONTROLLER_CONFIG structure. |
| UCMTCPCI_PORT_CONTROLLER_IDENTIFICATION_INIT | Initializes the UCMTCPCI_PORT_CONTROLLER_IDENTIFICATION structure. |
| UcmTcpciDeviceInitialize | Initializes the USB Type-C Port Controller Interface framework extension (UcmTcpciCx). |
| UcmTcpciDeviceInitInitialize | Initializes device initialization operations when the Plug and Play (PnP) manager reports the existence of a device. |
| UcmTcpciPortControllerAlert | Sends information about the hardware alerts that are received on the port controller to UcmTcpciCx. |
| UcmTcpciPortControllerCreate | Creates a port controller object to register with UcmTcpciCx. |
| UcmTcpciPortControllerSetHardwareRequestQueue | Assigns a framework queue object to which the UcmTcpciCx dispatches hardware requests for the port controller. |
| UcmTcpciPortControllerStart | Indicates to the UcmTcpciCx class extension that the client driver is now ready to service hardware requests for the port controller. |
| UcmTcpciPortControllerStop | Indicates to the UcmTcpciCx class extension to stop sending hardware requests to the port controller object. |
| UCMUCSI_CONNECTOR_INFO_INIT | Initializes a UCMUCSI_CONNECTOR_INFO structure. |
| UCMUCSI_DEVICE_CONFIG_INIT | Initializes a UCMUCSI_DEVICE_CONFIG structure. |
| UCMUCSI_PPM_CONFIG_INIT | Initializes a UCMUCSI_PPM_CONFIG structure. |
| UcmUcsiConnectorCollectionAddConnector | Adds a connector to the connector collection object. |
| UcmUcsiConnectorCollectionCreate | Creates a connector collection object with UcmUcsiCx. |
| UcmUcsiDeviceInitialize | Initializes the UCSI extension (UcmUcsiCx). |
| UcmUcsiDeviceInitInitialize | Intializes the WDFDEVICE_INIT provided by the framework. |
| UcmUcsiPpmNotification | Informs the UcmUcsiCx class extension about a UCSI notification. |
| UcmUcsiPpmSetUcsiCommandRequestQueue | Provides a framework queue object that is used to dispatch UCSI commands to the client driver. |
| UcmUcsiPpmStart | Instructs the class extension to start sending requests to the client driver. |
| UcmUcsiPpmStop | Instructs the class extension to stop sending requests to the client driver. |
| UCSI_CMD_SUCCEEDED | On successful completion of a UCSI command the PPM firmware fills the CCI Data Structure provided by the client driver. |
| UCX_CONTROLLER_CONFIG_SET_ACPI_INFO | Initializes a UCX_CONTROLLER_CONFIG structure with the specified values for the controller with ACPI as the parent. |
| UCX_CONTROLLER_CONFIG_SET_PCI_INFO | Initializes a UCX_CONTROLLER_CONFIG structure with the specified values for the controller with PCI as the parent bus type. |
| UCX_DEFAULT_ENDPOINT_EVENT_CALLBACKS_INIT | Initializes a UCX_DEFAULT_ENDPOINT_EVENT_CALLBACKS structure with client driver's callback functions. The client driver calls this function before calling UcxEndpointCreate method to create an endpoint and register its callback functions with UCX. |
| UCX_ENDPOINT_EVENT_CALLBACKS_INIT | Initializes a UCX_ENDPOINT_EVENT_CALLBACKS structure with client driver's callback functions. The client driver calls this function before calling UcxEndpointCreate method to create an endpoint and register its callback functions with UCX. |
| UCX_USBDEVICE_EVENT_CALLBACKS_INIT | Initializes a UCX_USBDEVICE_EVENT_CALLBACKS structure with the function pointers to client driver's callback functions. |
| UcxControllerCreate | Creates a host controller object. |
| UcxControllerNeedsReset | Initiates a non-Plug and Play (PnP) controller reset operation by queuing an event into the controller reset state machine. |
| UcxControllerNotifyTransportCharacteristicsChange | Notifies UCX about a new port change event from host controller. |
| UcxControllerResetComplete | Informs USB Host Controller Extension (UCX) that the reset operation has competed. |
| UcxControllerSetFailed | Informs USB Host Controller Extension (UCX) that the controller has encountered a critical failure. |
| UcxControllerSetIdStrings | Updates the identifier strings of a controller after the controller has been initialized. |
| UcxDefaultEndpointInitSetEventCallbacks | Initializes a UCXENDPOINT_INIT structure with client driver's event callback functions related to the default endpoint. |
| UcxEndpointAbortComplete | Notifies UCX that a transfer abort operation has been completed on the specified endpoint object. |
| UcxEndpointCreate | Creates an endpoint on the specified USB device object. |
| UcxEndpointGetStaticStreamsReferenced | Returns a referenced static streams object for the specified endpoint. |
| UcxEndpointInitSetEventCallbacks | Initializes a UCXENDPOINT_INIT structure with client driver's event callback functions related to endpoints on the device. |
| UcxEndpointNeedToCancelTransfers | The client driver calls this method before it cancels transfers on the wire. |
| UcxEndpointNoPingResponseError | Notifies UCX about a 'No Ping Response' error for a transfer on the specified endpoint object. |
| UcxEndpointPurgeComplete | Notifies UCX that a purge operation has been completed on the specified endpoint object. |
| UcxEndpointSetWdfIoQueue | Sets a framework queue on the specified endpoint object. |
| UcxInitializeDeviceInit | Initializes device initialization operations when the Plug and Play (PnP) manager reports the existence of a device. |
| UcxIoDeviceControl | Allows USB host controller extension (UCX) to handle an I/O control code (IOCTL) request from user mode. |
| UcxRootHubPortChanged | Notifies UCX about a new port change event on the host controller. |
| UcxStaticStreamsCreate | Creates a static streams object. |
| UcxStaticStreamsSetStreamInfo | Sets stream information for each stream enabled by the client driver. |
| UcxUsbDeviceCreate | Creates a USB device object on the specified controller. |
| UcxUsbDeviceInitSetEventCallbacks | Initializes a UCXUSBDEVICE_INIT structure with client driver's event callback functions. |
| UcxUsbDeviceRemoteWakeNotification | Notifies UCX that a remote wake signal from the device is received. |
| UDECX_USB_DEVICE_CALLBACKS_INIT | Initializes a UDECX_USB_DEVICE_STATE_CHANGE_CALLBACKS structure before a UdecxUsbDeviceCreate call. |
| UDECX_USB_DEVICE_PLUG_IN_OPTIONS_INIT | Initializes a UDECX_USB_DEVICE_PLUG_IN_OPTIONS structure. |
| UDECX_USB_ENDPOINT_CALLBACKS_INIT | Initializes a UDECX_USB_ENDPOINT_CALLBACKS structure before a UdecxUsbEndpointCreate call. |
| UDECX_WDF_DEVICE_CONFIG_INIT | Initializes a UDECX_WDF_DEVICE_CONFIG structure. |
| UdecxInitializeWdfDeviceInit | Initializes device initialization operations when the Plug and Play (PnP) manager reports the existence of a device. |
| UdecxUrbComplete | Completes the URB request with a USB-specific completion status code. |
| UdecxUrbCompleteWithNtStatus | Completes the URB request with an NTSTATUS code. |
| UdecxUrbRetrieveBuffer | Retrieves the transfer buffer of an URB from the specified framework request object sent to the endpoint queue. |
| UdecxUrbRetrieveControlSetupPacket | Retrieves a USB control setup packet from a specified framework request object. |
| UdecxUrbSetBytesCompleted | Sets the number of bytes transferred for the URB contained within a framework request object. |
| UdecxUsbDeviceCreate | Creates a USB Device Emulation (UDE) device object. |
| UdecxUsbDeviceInitAddDescriptor | Adds a USB descriptor to the initialization parameters used to create a virtual USB device. |
| UdecxUsbDeviceInitAddDescriptorWithIndex | Adds a USB descriptor to the initialization parameters used to create a virtual USB device. |
| UdecxUsbDeviceInitAddStringDescriptor | Adds a USB string descriptor to the initialization parameters used to create a virtual USB device. |
| UdecxUsbDeviceInitAddStringDescriptorRaw | Adds a USB string descriptor to the initialization parameters used to create a virtual USB device. |
| UdecxUsbDeviceInitAllocate | Allocates memory for a UDECXUSBDEVICE_INIT structure that is used to initialize a virtual USB device. |
| UdecxUsbDeviceInitFree | Releases the resources that were allocated by the UdecxUsbDeviceInitAllocate call. |
| UdecxUsbDeviceInitSetEndpointsType | Indicates the type of endpoint (simple or dynamic) in the initialization parameters that the client driver uses to create the virtual USB device. |
| UdecxUsbDeviceInitSetSpeed | Sets the USB speed of the virtual USB device to create. |
| UdecxUsbDeviceInitSetStateChangeCallbacks | Initializes a WDF-allocated structure with pointers to callback functions. |
| UdecxUsbDeviceLinkPowerEntryComplete | Completes an asynchronous request for bringing the device out of a low power state. |
| UdecxUsbDeviceLinkPowerExitComplete | Completes an asynchronous request for sending the device to a low power state. |
| UdecxUsbDevicePlugIn | Notifies the USB device emulation class extension (UdeCx) that the USB device has been plugged in the specified port. |
| UdecxUsbDevicePlugOutAndDelete | Disconnects the virtual USB device. |
| UdecxUsbDeviceSetFunctionSuspendAndWakeComplete | Completes an asynchronous request for changing the power state of a particular function of a virtual USB 3.0 device. |
| UdecxUsbDeviceSignalFunctionWake | Initiates wake up of the specified function from a low power state. This applies to virtual USB 3.0 devices. |
| UdecxUsbDeviceSignalWake | Initiates wake up from a low link power state for a virtual USB 2.0 device. |
| UdecxUsbEndpointCreate | Creates a UDE endpoint object. |
| UdecxUsbEndpointInitFree | Release the resources that were allocated by the UdecxUsbSimpleEndpointInitAllocate call. |
| UdecxUsbEndpointInitSetCallbacks | Sets pointers to UDE client driver-implemented callback functions in the initialization parameters of the simple endpoint to create. |
| UdecxUsbEndpointInitSetEndpointAddress | Sets the address of the endpoint in the initialization parameters of the simple endpoint to create. |
| UdecxUsbEndpointPurgeComplete | Completes an asynchronous request for canceling all I/O requests queued to the specified endpoint. |
| UdecxUsbEndpointSetWdfIoQueue | Sets a framework queue object with a UDE endpoint. |
| UdecxUsbSimpleEndpointInitAllocate | Allocates memory for an initialization structure that is used to create a simple endpoint for the specified virtual USB device. |
| UdecxWdfDeviceAddUsbDeviceEmulation | Initializes a framework device object to support operations related to a host controller and a virtual USB device attached to the controller. |
| UdecxWdfDeviceResetComplete | Informs the USB device emulation class extension (UdeCx) that the reset operation on the specified controller has competed. |
| UdecxWdfDeviceTryHandleUserIoctl | Attempts to handle an IOCTL request sent by a user-mode software. |
| UFX_DEVICE_CALLBACKS_INIT | The UFX_DEVICE_CALLBACKS_INIT macro initializes the UFX_DEVICE_CALLBACKS structure. |
| UFX_DEVICE_CAPABILITIES_INIT | The UFX_DEVICE_CAPABILITIES_INIT macro the initializes the UFX_DEVICE_CAPABILITIES structure. |
| UFX_ENDPOINT_CALLBACKS_INIT | The UFX_ENDPOINT_CALLBACKS_INIT macro initializes the UFX_ENDPOINT_CALLBACKS structure. |
| UFX_PROPRIETARY_CHARGER_ABORT_OPERATION | The filter driver's implementation to abort a charger operation. |
| UFX_PROPRIETARY_CHARGER_DETECT | The filter driver's implementation to detect if a charger is attached and get details about the charger. |
| UFX_PROPRIETARY_CHARGER_RESET_OPERATION | The filter driver's implementation to reset a charger operation. |
| UFX_PROPRIETARY_CHARGER_SET_PROPERTY | The filter driver's implementation to set a configurable property on the charger. |
| UfxDeviceCreate | Creates a UFX device object, registers event callback routines, and specifies capabilities specific to the controller. |
| UfxDeviceEventComplete | Informs UFX that the client driver has completed processing a UFX callback function. |
| UfxDeviceIoControl | Passes non-internal IOCTLs from user-mode to UFX. |
| UfxDeviceIoInternalControl | Passes kernel mode IOCTLs to UFX. |
| UfxDeviceNotifyAttach | Notifies UFX that the device's USB cable has been attached. |
| UfxDeviceNotifyDetach | Notifies UFX that the device's USB cable has been detached. |
| UfxDeviceNotifyHardwareFailure | Notifies UFX about a non-recoverable hardware failure in the controller. |
| UfxDeviceNotifyHardwareReady | Notifies UFX that the hardware is ready. |
| UfxDeviceNotifyReset | Notifies UFX about a USB bus reset event. |
| UfxDeviceNotifyResume | Notifies UFX about a USB bus resume event. |
| UfxDeviceNotifySuspend | Notifies UFX about a USB bus suspend event. |
| UfxDevicePortDetectComplete | Notifies UFX about the port type that was detected. |
| UfxDevicePortDetectCompleteEx | Notifies UFX about the port type that was detected, and optionally requests an action. |
| UfxDeviceProprietaryChargerDetectComplete | Notifies UFX about a detected proprietary port/charger type. |
| UfxEndpointCreate | Creates an endpoint object. |
| UfxEndpointGetCommandQueue | Returns the command queue previously created by UfxEndpointCreate. |
| UfxEndpointGetTransferQueue | Returns the transfer queue previously created by UfxEndpointCreate. |
| UfxEndpointInitSetEventCallbacks | Initialize a UFXENDPOINT_INIT structure. |
| UfxEndpointNotifySetup | Notifies UFX when the client driver receives a setup packet from the host. |
| UfxFdoInit | Initializes the WDFDEVICE_INIT structure that the client driver subsequently provides when it calls WdfDeviceCreate. |
| URS_CONFIG_INIT | Initializes a URS_CONFIG structure. |
| UrsDeviceInitialize | Initializes a framework device object to support operations related to a USB dual-role controller and registers the relevant event callback functions with the USB dual-role controller class extension. |
| UrsDeviceInitInitialize | Initializes device initialization operations when the Plug and Play (PnP) manager reports the existence of a device. |
| UrsIoResourceListAppendDescriptor | Appends the specified resource descriptor to the specified I/O resource list object that maintains resource descriptors for the host or function role. |
| UrsReportHardwareEvent | Notifies the USB dual-role class extension about a new hardware event. |
| UrsSetHardwareEventSupport | Indicates the client driver's support for reporting new hardware events. |
| UrsSetPoHandle | Registers and deletes the client driver's registration with the power management framework (PoFx). |
| UsbBuildGetStatusRequest | The UsbBuildGetStatusRequest macro formats an URB to obtain status from a device, interface, endpoint, or other device-defined target on a USB device. |
| UsbBuildInterruptOrBulkTransferRequest | The UsbBuildInterruptOrBulkTransferRequest macro formats an URB to send or receive data on a bulk pipe, or to receive data from an interrupt pipe. |
| UsbBuildOpenStaticStreamsRequest | The UsbBuildOpenStaticStreamsRequest inline function formats an URB structure for an open-streams request. The request opens streams associated with the specified bulk endpoint. |
| USBC_START_DEVICE_CALLBACK | The USBC_START_DEVICE_CALLBACK routine allows a USB client driver to provide a custom definition of the interface collections on a device. |
| USBD_AssignUrbToIoStackLocation | The USBD_AssignUrbToIoStackLocation routine is called by a client driver to associate an URB with the IRP's next stack location. |
| USBD_BuildRegisterCompositeDevice | The USBD_BuildRegisterCompositeDevice routine is called by the driver of a USB multi-function device (composite driver) to initialize a REGISTER_COMPOSITE_DEVICE structure with the information required for registering the driver with the USB driver stack. |
| USBD_CalculateUsbBandwidth | The USBD_CalculateUsbBandwidth routine has been deprecated in Windows XP and later operating systems. Do not use. |
| USBD_CloseHandle | The USBD_CloseHandle routine is called by a USB client driver to close a USBD handle and release all resources associated with the driver's registration. |
| USBD_CreateConfigurationRequest | The USBD_CreateConfigurationRequest routine has been deprecated. Use USBD_CreateConfigurationRequestEx instead. |
| USBD_CreateConfigurationRequestEx | The USBD_CreateConfigurationRequestEx routine allocates and formats a URB to select a configuration for a USB device.USBD_CreateConfigurationRequestEx replaces USBD_CreateConfigurationRequest. |
| USBD_CreateHandle | The USBD_CreateHandle routine is called by a WDM USB client driver to obtain a USBD handle. The routine registers the client driver with the underlying USB driver stack. |
| USBD_GetInterfaceLength | The USBD_GetInterfaceLength routine obtains the length of a given interface descriptor, including the length of all endpoint descriptors contained within the interface. |
| USBD_GetPdoRegistryParameter | The USBD_GetPdoRegistryParameter routine retrieves the value from the specified key in the USB device's hardware registry. |
| USBD_GetUSBDIVersion | The USBD_GetUSBDIVersion routine returns version information about the host controller driver (HCD) that controls the client's USB device.Note USBD_IsInterfaceVersionSupported replaces the USBD_GetUSBDIVersion routine |
| USBD_IsInterfaceVersionSupported | The USBD_IsInterfaceVersionSupported routine is called by a USB client driver to check whether the underlying USB driver stack supports a particular USBD interface version. |
| USBD_IsochUrbAllocate | The USBD_IsochUrbAllocate routine allocates and formats a URB structure for an isochronous transfer request. |
| USBD_ParseConfigurationDescriptor | The USBD_ParseConfigurationDescriptor routine has been deprecated. Use USBD_ParseConfigurationDescriptorEx instead. |
| USBD_ParseConfigurationDescriptorEx | The USBD_ParseConfigurationDescriptorEx routine searches a given configuration descriptor and returns a pointer to an interface that matches the given search criteria. |
| USBD_ParseDescriptors | The USBD_ParseDescriptors routine searches a given configuration descriptor and returns a pointer to the first descriptor that matches the search criteria. |
| USBD_QueryBusTime | The USBD_QueryBusTime routine has been deprecated in Windows XP and later operating systems. Do not use. |
| USBD_QueryUsbCapability | The USBD_QueryUsbCapability routine is called by a WDM client driver to determine whether the underlying USB driver stack and the host controller hardware support a specific capability. |
| USBD_RegisterHcFilter | The USBD_RegisterHcFilter routine has been deprecated in Windows XP and later operating systems. |
| USBD_SelectConfigUrbAllocateAndBuild | The USBD_SelectConfigUrbAllocateAndBuild routine allocates and formats a URB structure that is required to select a configuration for a USB device. |
| USBD_SelectInterfaceUrbAllocateAndBuild | The USBD_SelectInterfaceUrbAllocateAndBuild routine allocates and formats a URB structure that is required for a request to select an interface or change its alternate setting. |
| USBD_UrbAllocate | The USBD_UrbAllocate routine allocates a USB Request Block (URB). |
| USBD_UrbFree | The USBD_UrbFree routine releases the URB that is allocated by USBD_UrbAllocate, USBD_IsochUrbAllocate, USBD_SelectConfigUrbAllocateAndBuild, or USBD_SelectInterfaceUrbAllocateAndBuild. |
| USBD_ValidateConfigurationDescriptor | The USBD_ValidateConfigurationDescriptor routine validates all descriptors returned by a device in its response to a configuration descriptor request. |
| USBFN_GET_ATTACH_ACTION | The filter driver's implementation that gets invoked when charger is attached to the port. |
| USBFN_GET_ATTACH_ACTION_ABORT | The filter driver's implementation to abort an attach-detect operation. |
| USBFN_SET_DEVICE_STATE | The filter driver's implementation to set the device state and operating bus speed. |
| USBPM_ASSIGN_CONNECTOR_POWER_LEVEL_PARAMS_INIT | Initializes a USBPM_ASSIGN_CONNECTOR_POWER_LEVEL_PARAMS structure. |
| UsbPm_AssignConnectorPowerLevel | Attempts a PD contract renegotiation with the specified voltage/current/power value. |
| USBPM_CLIENT_CONFIG_EXTRA_INFO_INIT | Initializes a USBPM_CLIENT_CONFIG_EXTRA_INFO structure. |
| USBPM_CLIENT_CONFIG_INIT | Initializes a USBPM_CLIENT_CONFIG structure. |
| USBPM_CONNECTOR_PROPERTIES_INIT | Initializes a USBPM_CONNECTOR_PROPERTIES structure. |
| USBPM_CONNECTOR_STATE_INIT | Initializes a USBPM_CONNECTOR_STATE_INIT structure. |
| UsbPm_Deregister | Unregisters the client driver with the Policy Manager. |
| USBPM_HUB_CONNECTOR_HANDLES_INIT | Initializes a USBPM_HUB_CONNECTOR_HANDLES structure. |
| USBPM_HUB_PROPERTIES_INIT | Initializes a [USBPM_HUB_PROPERTIES] structure. |
| UsbPm_Register | Registers the client driver with the Policy Manager to report hub arrival/removal and connector state changes. |
| UsbPm_RetrieveConnectorProperties | Retrieves the properties of a connector. The properties are static information that do not change during the lifecycle of a connector. |
| UsbPm_RetrieveConnectorState | Retrieves the current state of a connector. Unlike connector properties, state information is dynamic, which can change at runtime. |
| UsbPm_RetrieveHubConnectorHandles | Retrieves connector handles for all connectors of a hub. |
| UsbPm_RetrieveHubProperties | Retrieves the properties of a hub. Properties are static information that do not change during the lifecycle of a hub. |
Structures
| Title | Description |
|---|---|
| _URB_BULK_OR_INTERRUPT_TRANSFER | The _URB_BULK_OR_INTERRUPT_TRANSFER structure is used by USB client drivers to send or receive data on a bulk pipe or on an interrupt pipe. |
| _URB_CONTROL_DESCRIPTOR_REQUEST | The _URB_CONTROL_DESCRIPTOR_REQUEST structure is used by USB client drivers to get or set descriptors on a USB device. |
| _URB_CONTROL_FEATURE_REQUEST | The _URB_CONTROL_FEATURE_REQUEST structure is used by USB client drivers to set or clear features on a device, interface, or endpoint. |
| _URB_CONTROL_GET_CONFIGURATION_REQUEST | The _URB_CONTROL_GET_CONFIGURATION_REQUEST structure is used by USB client drivers to retrieve the current configuration for a device. |
| _URB_CONTROL_GET_INTERFACE_REQUEST | The _URB_CONTROL_GET_INTERFACE_REQUEST structure is used by USB client drivers to retrieve the current alternate interface setting for an interface in the current configuration. |
| _URB_CONTROL_GET_STATUS_REQUEST | The _URB_CONTROL_GET_STATUS_REQUEST structure is used by USB client drivers to retrieve status from a device, interface, endpoint, or other device-defined target. |
| _URB_CONTROL_TRANSFER | The _URB_CONTROL_TRANSFER structure is used by USB client drivers to transfer data to or from a control pipe. |
| _URB_CONTROL_TRANSFER_EX | The _URB_CONTROL_TRANSFER_EX structure is used by USB client drivers to transfer data to or from a control pipe, with a timeout that limits the acceptable transfer time. |
| _URB_CONTROL_VENDOR_OR_CLASS_REQUEST | The _URB_CONTROL_VENDOR_OR_CLASS_REQUEST structure is used by USB client drivers to issue a vendor or class-specific command to a device, interface, endpoint, or other device-defined target. |
| _URB_GET_CURRENT_FRAME_NUMBER | The _URB_GET_CURRENT_FRAME_NUMBER structure is used by USB client drivers to retrieve the current frame number. |
| _URB_GET_ISOCH_PIPE_TRANSFER_PATH_DELAYS | The _URB_GET_ISOCH_PIPE_TRANSFER_PATH_DELAYS structure is used by USB client drivers to retrieve delays associated with isochronous transfer programming in the host controller and transfer completion so that the client driver can ensure that the device gets the isochronous packets in time. |
| _URB_HEADER | The _URB_HEADER structure is used by USB client drivers to provide basic information about the request being sent to the host controller driver. |
| _URB_ISOCH_TRANSFER | The _URB_ISOCH_TRANSFER structure is used by USB client drivers to send data to or retrieve data from an isochronous transfer pipe. |
| _URB_OPEN_STATIC_STREAMS | The _URB_OPEN_STATIC_STREAMS structure is used by a USB client driver to open streams in the specified bulk endpoint. |
| _URB_OS_FEATURE_DESCRIPTOR_REQUEST | The _URB_OS_FEATURE_DESCRIPTOR_REQUEST structure is used by the USB hub driver to retrieve Microsoft OS Feature Descriptors from a USB device or an interface on a USB device. |
| _URB_PIPE_REQUEST | The _URB_PIPE_REQUEST structure is used by USB client drivers to clear a stall condition on an endpoint. |
| _URB_SELECT_CONFIGURATION | The _URB_SELECT_CONFIGURATION structure is used by client drivers to select a configuration for a USB device. |
| _URB_SELECT_INTERFACE | The _URB_SELECT_INTERFACE structure is used by USB client drivers to select an alternate setting for an interface or to change the maximum packet size of a pipe in the current configuration on a USB device. |
| ADDRESS0_OWNERSHIP_ACQUIRE | Contains parameters for configuring the device. |
| ALTERNATE_INTERFACE | The ALTERNATE_INTERFACE structure provides information about alternate settings for a Universal Serial Bus (USB) interface. |
| COMPOSITE_DEVICE_CAPABILITIES | The COMPOSITE_DEVICE_CAPABILITIES structure specifies the capabilities of the driver of a USB multi-function device (composite driver). To initialize the structure, use the COMPOSITE_DEVICE_CAPABILITIES_INIT macro. |
| CONTROLLER_USB_20_HARDWARE_LPM_FLAGS | Describes supported protocol capabilities for Link Power Management (LPM) in as defined the USB 2.0 specification. |
| DEFAULT_ENDPOINT_UPDATE | Contains the handle to the default endpoint to update in a framework request that is passed by UCX when it invokes EVT_UCX_DEFAULT_ENDPOINT_UPDATE callback function. |
| ENDPOINT_RESET | Describes information required to reset an endpoint. This structure is passed by UCX in the EVT_UCX_ENDPOINT_RESET callback function. |
| ENDPOINTS_CONFIGURE | Describes endpoints to enable or disable endpoints. This structure is passed by UCX in the EVT_UCX_USBDEVICE_ENDPOINTS_CONFIGURE callback function. |
| ENDPOINTS_CONFIGURE_FAILURE_FLAGS | This structure provides failure flags to indicate errors, if any, that might have occurred during a request to an EVT_UCX_USBDEVICE_ENDPOINTS_CONFIGURE callback function. |
| HUB_DEVICE_CONFIG_INFO | The HUB_DEVICE_CONFIG_INFO structure is used in conjunction with the kernel-mode IOCTL, IOCTL_INTERNAL_USB_GET_DEVICE_CONFIG_INFO to request to report information about a USB device and the hub to which the device is attached. |
| HUB_INFO_FROM_PARENT | Describes information about a hub from its parent device. |
| PARENT_HUB_FLAGS | This structure is used by the HUB_INFO_FROM_PARENT structure to get hub information from the parent. |
| REGISTER_COMPOSITE_DEVICE | The REGISTER_COMPOSITE_DEVICE structure is used with the IOCTL_INTERNAL_USB_REGISTER_COMPOSITE_DEVICE I/O control request to register a parent driver of a Universal Serial Bus (USB) multi-function device (composite driver) with the USB driver stack. |
| REQUEST_REMOTE_WAKE_NOTIFICATION | The purpose of the REQUEST_REMOTE_WAKE_NOTIFICATION structure is to specify input parameters for the IOCTL_INTERNAL_USB_REQUEST_REMOTE_WAKE_NOTIFICATION I/O control request. |
| ROOTHUB_20PORT_INFO | Provides information about a USB 2.0 root hub port. This structure is passed by UCX in the EVT_UCX_ROOTHUB_GET_20PORT_INFO callback function. |
| ROOTHUB_20PORTS_INFO | This structure that has an array of 2.0 ports supported by the root hub. This structure is provided by UCX in a framework request in the EVT_UCX_ROOTHUB_GET_20PORT_INFO callback function. |
| ROOTHUB_30PORT_INFO | Provides information about a USB 3.0 root hub port. This structure is passed by UCX in the EVT_UCX_ROOTHUB_GET_30PORT_INFO callback function. |
| ROOTHUB_30PORT_INFO_EX | Provides extended USB 3.0 port information about speed. |
| ROOTHUB_30PORTS_INFO | Provides information about USB 3.0 root hub ports. This structure is passed by UCX in the EVT_UCX_ROOTHUB_GET_30PORT_INFO callback function. |
| ROOTHUB_INFO | Provides information about a USB root hub. This structure is passed by UCX in the EVT_UCX_ROOTHUB_GET_INFO callback function. |
| STREAM_INFO | This structure stores information about a stream associated with a bulk endpoint. |
| UCM_CONNECTOR_CONFIG | Describes the configuration options for a Type-C connector object. An initialized UCM_MANAGER_CONFIG structure is an input parameter value to UcmInitializeDevice. |
| UCM_CONNECTOR_PD_CONFIG | Describes the Power Delivery 2.0 capabilities of the connector. |
| UCM_CONNECTOR_PD_CONN_STATE_CHANGED_PARAMS | Describes the parameters for PD connection changed event. |
| UCM_CONNECTOR_TYPEC_ATTACH_PARAMS | Describes the partner that is currently attached to the connector. |
| UCM_CONNECTOR_TYPEC_CONFIG | Describes the configuration options for a Type-C connector. |
| UCM_MANAGER_CONFIG | Describes the configuration options for the UCM Manager. An initialized UCM_MANAGER_CONFIG structure is an input parameter value to UcmInitializeDevice. |
| UCM_PD_POWER_DATA_OBJECT | Describes a Power Data Object. For information about these members, see the Power Delivery specification. |
| UCM_PD_REQUEST_DATA_OBJECT | Describes a Request Data Object (RDO). For information about these members, see the Power Delivery specification. |
| UCMTCPCI_DEVICE_CONFIG | Used in the client driver's call to UcmTcpciDeviceInitialize. Call UCMTCPCI_DEVICE_CONFIG_INIT to initialize this structure. |
| UCMTCPCI_DRIVER_GLOBALS | The global structure for the USB Type-C Port Controller Interface framework extension (UcmTcpciCx). |
| UCMTCPCI_PORT_CONTROLLER_ALERT_DATA | Contains information about hardware alerts received on the port controller object. This structure is used in the UcmTcpciPortControllerAlert call. Call UCMTCPCI_PORT_CONTROLLER_ALERT_DATA_INIT to initialize this structure. |
| UCMTCPCI_PORT_CONTROLLER_ALTERNATE_MODE_ENTERED_IN_PARAMS | Stores information about the alternate mode that was detected. This structure is used in the IOCTL_UCMTCPCI_PORT_CONTROLLER_ALTERNATE_MODE_ENTERED request. |
| UCMTCPCI_PORT_CONTROLLER_ALTERNATE_MODE_EXITED_IN_PARAMS | Stores information about the alternate mode that was exited. This structure is used in the IOCTL_UCMTCPCI_PORT_CONTROLLER_ALTERNATE_MODE_EXITED request. |
| UCMTCPCI_PORT_CONTROLLER_CAPABILITIES | Contains information about the capabilities of the port controller. |
| UCMTCPCI_PORT_CONTROLLER_CONFIG | Contains configuration options for the port controller object, passed by the client driver in the call to UcmTcpciPortControllerCreate. Call UCMTCPCI_PORT_CONTROLLER_CONFIG_INIT to initialize this structure. |
| UCMTCPCI_PORT_CONTROLLER_DISPLAYPORT_CONFIGURED_IN_PARAMS | Stores information about the pin assignment of the DisplayPort alternate mode that was configured. This structure is used in the IOCTL_UCMTCPCI_PORT_CONTROLLER_DISPLAYPORT_CONFIGURED request. |
| UCMTCPCI_PORT_CONTROLLER_DISPLAYPORT_DISPLAY_OUT_STATUS_CHANGED_IN_PARAMS | Stores information about display out status of the DisplayPort connection. This structure is used in the IOCTL_UCMTCPCI_PORT_CONTROLLER_DISPLAYPORT_DISPLAY_OUT_STATUS_CHANGED request. |
| UCMTCPCI_PORT_CONTROLLER_DISPLAYPORT_HPD_STATUS_CHANGED_IN_PARAMS | Stores information about hot plug detect status of the DisplayPort connection. This structure is used in the IOCTL_UCMTCPCI_PORT_CONTROLLER_DISPLAYPORT_HPD_STATUS_CHANGED request. |
| UCMTCPCI_PORT_CONTROLLER_GET_CONTROL_IN_PARAMS | This structure is used in the IOCTL_UCMTCPCI_PORT_CONTROLLER_GET_CONTROL request. |
| UCMTCPCI_PORT_CONTROLLER_GET_CONTROL_OUT_PARAMS | Stores the values of all control registers of the port controller retrieved by the IOCTL_UCMTCPCI_PORT_CONTROLLER_GET_CONTROL request. |
| UCMTCPCI_PORT_CONTROLLER_GET_STATUS_IN_PARAMS | This structure is used in the IOCTL_UCMTCPCI_PORT_CONTROLLER_GET_STATUS request. |
| UCMTCPCI_PORT_CONTROLLER_GET_STATUS_OUT_PARAMS | Stores the values of all status registers of the port controller. This structure is used in the IOCTL_UCMTCPCI_PORT_CONTROLLER_GET_STATUS request. |
| UCMTCPCI_PORT_CONTROLLER_IDENTIFICATION | Contains identification information and USB specification version information (in BCD format) about the port controller. |
| UCMTCPCI_PORT_CONTROLLER_SET_COMMAND_IN_PARAMS | Stores the specified command registers. This structure is used in the IOCTL_UCMTCPCI_PORT_CONTROLLER_SET_COMMAND request. |
| UCMTCPCI_PORT_CONTROLLER_SET_CONFIG_STANDARD_OUTPUT_IN_PARAMS | Stores the value of the CONFIG_STANDARD_OUTPUT Register. This structure is used in the IOCTL_UCMTCPCI_PORT_CONTROLLER_SET_CONFIG_STANDARD_OUTPUT request. |
| UCMTCPCI_PORT_CONTROLLER_SET_CONTROL_IN_PARAMS | Stores the values of all control registers. This structure is used in the IOCTL_UCMTCPCI_PORT_CONTROLLER_SET_CONTROL request. |
| UCMTCPCI_PORT_CONTROLLER_SET_MESSAGE_HEADER_INFO_IN_PARAMS | Stores the value of the VBUS_VOLTAGE_ALARM_LO_CFG Register. This structure is used in the IOCTL_UCMTCPCI_PORT_CONTROLLER_SET_MESSAGE_HEADER_INFO request. |
| UCMTCPCI_PORT_CONTROLLER_SET_RECEIVE_DETECT_IN_PARAMS | Stores the value of the RECEIVE_DETECT Register. This structure is used in the IOCTL_UCMTCPCI_PORT_CONTROLLER_SET_RECEIVE_DETECT request. |
| UCMTCPCI_PORT_CONTROLLER_SET_TRANSMIT_BUFFER_IN_PARAMS | Stores the value of the TRANSMIT_BUFFER Register. This structure is used in the IOCTL_UCMTCPCI_PORT_CONTROLLER_SET_TRANSMIT_BUFFER request. |
| UCMTCPCI_PORT_CONTROLLER_SET_TRANSMIT_IN_PARAMS | Stores the values of TRANSMIT Register. This structure is used in the IOCTL_UCMTCPCI_PORT_CONTROLLER_SET_TRANSMIT request. |
| UCMUCSI_CONNECTOR_INFO | Stores information about connectors that cannot be obtained by sending UCSI commands such as “Get Connector Capability”. |
| UCMUCSI_DEVICE_CONFIG | Configuration structure for UcmUcsiDeviceInitialize. |
| UCMUCSI_DRIVER_GLOBALS | Reserved. |
| UCMUCSI_PPM_CONFIG | Stores configuration information required to create a Platform Policy Manager (PPM). |
| UCMUCSI_PPM_GET_UCSI_DATA_BLOCK_IN_PARAMS | Contains a USCI data block for input to IOCTL_UCMUCSI_PPM_GET_UCSI_DATA_BLOCK. |
| UCMUCSI_PPM_GET_UCSI_DATA_BLOCK_OUT_PARAMS | Contains a USCI data block for output to IOCTL_UCMUCSI_PPM_GET_UCSI_DATA_BLOCK. |
| UCMUCSI_PPM_SEND_UCSI_DATA_BLOCK_IN_PARAMS | Contains a USCI data block for input to IOCTL_UCMUCSI_PPM_SEND_UCSI_DATA_BLOCK. |
| UCSI_ACK_CC_CI_COMMAND | Used in the ACK_CC_CI command. See Table 4-7. |
| UCSI_ALTERNATE_MODE | Used in GET_ALTERNATE_MODES command. See Table 4-26. |
| UCSI_BM_POWER_SOURCE | Used in GET_CAPABILITY command. See Bit 15:8 in Table 4-14. |
| UCSI_CCI | Used in GET_CONNECTOR_CAPABILITY command. See Table 4-16. |
| UCSI_CONNECTOR_RESET_COMMAND | Used in the CONNECTOR_RESET command. See Table 4-5. |
| UCSI_CONTROL | Used in the SET_NOTIFICATION_ENABLE command. See Table 4-9. |
| UCSI_DATA_BLOCK | The data structures for memory locations. See Section 3. |
| UCSI_GET_ALTERNATE_MODES_COMMAND | Used in the GET_ALTERNATE_MODES command. See Table 4-24. |
| UCSI_GET_ALTERNATE_MODES_IN | Used in the GET_ALTERNATE_MODES command. See Table 4-24. |
| UCSI_GET_CABLE_PROPERTY_COMMAND | Used in the GET_CABLE_PROPERTY command. See Table 4-37. |
| UCSI_GET_CABLE_PROPERTY_IN | Used in the GET_CABLE_PROPERTY command. See Table 4-39. |
| UCSI_GET_CAM_SUPPORTED_COMMAND | Used in the GET_CAM_SUPPORTED command. See Table 4-27. |
| UCSI_GET_CAM_SUPPORTED_IN | Used in the GET_CAM_SUPPORTED command. See Table 4-27. |
| UCSI_GET_CAPABILITY_IN | Used in the GET_CAPABILITY command. See Table 4-13. |
| UCSI_GET_CONNECTOR_CAPABILITY_COMMAND | Used in the GET_CONNECTOR_CAPABILITY command. See Table 4-15. |
| UCSI_GET_CONNECTOR_CAPABILITY_IN | Used in the GET_CONNECTOR_CAPABILITY command. See Table 4-17. |
| UCSI_GET_CONNECTOR_STATUS_COMMAND | Used in the GET_CONNECTOR_STATUS command. See Table 4-40. |
| UCSI_GET_CONNECTOR_STATUS_IN | Used in the GET_CONNECTOR_STATUS command. See Table 4-42. |
| UCSI_GET_CURRENT_CAM_COMMAND | Used in the GET_CURRENT_CAM command. See Table 4-29. |
| UCSI_GET_CURRENT_CAM_IN | Used in the GET_CURRENT_CAM command. See Table 4-31. |
| UCSI_GET_ERROR_STATUS_COMMAND | Used in the GET_ERROR_STATUS command. See Table 4-45 |
| UCSI_GET_ERROR_STATUS_IN | Used in the GET_ERROR_STATUS command. See Table 4-47. |
| UCSI_GET_PDOS_COMMAND | Used in the GET_PDOS command. See Table 4-34. |
| UCSI_GET_PDOS_IN | Used in the GET_PDOS command. See Table 4-36. |
| UCSI_MESSAGE_IN | The MESSAGE IN data structure. See Section 3.4. |
| UCSI_MESSAGE_OUT | The MESSAGE OUT data structure. See Section 3.5. |
| UCSI_SET_NEW_CAM_COMMAND | Used in the SET_NEW_CAM command. See Table 4-32. |
| UCSI_SET_NOTIFICATION_ENABLE_COMMAND | Used in the SET_NOTIFICATION_ENABLE command. See Table 4-9. |
| UCSI_SET_PDM_COMMAND | Obsolete. |
| UCSI_SET_PDR_COMMAND | Used in the SET_PDR command. See Table 4-22. |
| UCSI_SET_POWER_LEVEL_COMMAND | Used in the SET_POWER_LEVEL command. See Table 4-48. |
| UCSI_SET_UOM_COMMAND | Used in the SET_UOM command. See Table 4-18. |
| UCSI_SET_UOR_COMMAND | Used in the SET_UOR command. See Table 4-20. |
| UCSI_VERSION | The VERSION data structure. See Section 3.1. |
| UCX_CONTROLLER_ACPI_INFORMATION | This structure provides information about an advanced Configuration and power interface (ACPI) USB controller. |
| UCX_CONTROLLER_CONFIG | This structure configuration data for a USB controller. |
| UCX_CONTROLLER_PCI_INFORMATION | This structure provides information about a PCI USB controller. |
| UCX_CONTROLLER_RESET_COMPLETE_INFO | Contains information about the operation to reset the controller. This is used by the client driver in its EVT_UCX_CONTROLLER_RESET callback function. |
| UCX_CONTROLLER_TRANSPORT_CHARACTERISTICS | Stores the transport characteristics at relevant points in time. This structure is used in the EVT_UCX_CONTROLLER_GET_TRANSPORT_CHARACTERISTICS callback function. |
| UCX_CONTROLLER_TRANSPORT_CHARACTERISTICS_CHANGE_FLAGS | Defines flags for the transport characteristics changes. This structure is used in the EVT_UCX_CONTROLLER_SET_TRANSPORT_CHARACTERISTICS_CHANGE_NOTIFICATION callback function. |
| UCX_DEFAULT_ENDPOINT_EVENT_CALLBACKS | This structure provides a list of UCX default endpoint event callback functions. |
| UCX_ENDPOINT_CHARACTERISTIC | Stores the characteristics of an endpoint. |
| UCX_ENDPOINT_EVENT_CALLBACKS | This structure provides a list of pointers to UCX endpoint event callback functions. |
| UCX_ENDPOINT_ISOCH_TRANSFER_PATH_DELAYS | Stores the isochronous transfer path delay values. |
| UCX_ROOTHUB_CONFIG | Contains pointers to event callback functions for creating the root hub by calling UcxRootHubCreate. Initialize this structure by calling UCX_ROOTHUB_CONFIG_INIT initialization function (see Ucxclass.h). |
| UCX_USBDEVICE_CHARACTERISTIC | Stores the characteristics of an device. |
| UCX_USBDEVICE_CHARACTERISTIC_PATH_DELAY | Stores the isochronous transfer path delay values. |
| UCX_USBDEVICE_EVENT_CALLBACKS | This structure provides a list of UCX USB device event callback functions. |
| UCXUSBDEVICE_INFO | Contains information about the USB device. This structure is passed by UCX in the EVT_UCX_CONTROLLER_USBDEVICE_ADD event callback function. |
| UDECX_ENDPOINTS_CONFIGURE_PARAMS | Contains the configuration options specified by USB device emulation class extension (UdeCx) to the client driver when the class extension invokes EVT_UDECX_USB_DEVICE_ENDPOINTS_CONFIGURE. |
| UDECX_USB_DEVICE_PLUG_IN_OPTIONS | Contains the port numbers to which a virtual USB device is connected. Initialize this structure by calling the UDECX_USB_DEVICE_PLUG_IN_OPTIONS_INIT method. |
| UDECX_USB_DEVICE_STATE_CHANGE_CALLBACKS | Initializes a UDECX_USB_DEVICE_STATE_CHANGE_CALLBACKS structure with pointers to callback functions that are implemented by a UDE client for a virtual USB device. |
| UDECX_USB_ENDPOINT_CALLBACKS | Contains function pointers to endpoint callback functions implemented by the UDE client driver. Initialize this structure by calling UDECX_USB_ENDPOINT_CALLBACKS_INIT. |
| UDECX_USB_ENDPOINT_INIT_AND_METADATA | Contains the descriptors supported by an endpoint of a virtual USB device. |
| UDECX_WDF_DEVICE_CONFIG | Contains pointers to event callback functions implemented by the UDE client driver for a USB host controller. Initialize this structure by calling UDECX_WDF_DEVICE_CONFIG_INIT. |
| UFX_DEVICE_CALLBACKS | The UFX_DEVICE_CALLBACKS structure is used to define then event callback functions supported by the client driver. |
| UFX_DEVICE_CAPABILITIES | The UFX_DEVICE_CAPABILITIES structure is used USB to define properties of the Universal Serial Bus (USB) device created by the controller. |
| UFX_ENDPOINT_CALLBACKS | The UFX_ENDPOINT_CALLBACKS structure is used to define then event callback functions supported by the client driver. |
| UFX_HARDWARE_FAILURE_CONTEXT | The UFX_HARDWARE_FAILURE_CONTEXT structure is used to define controller-specific hardware failure properties. |
| UFX_INTERFACE_PROPRIETARY_CHARGER | Stores pointers to driver-implemented callback functions for handling proprietary charger operations. |
| UFX_PROPRIETARY_CHARGER | Describes the proprietary charger's device power requirements. |
| URB | The URB structure is used by USB client drivers to describe USB request blocks (URBs) that send requests to the USB driver stack. The URB structure defines a format for all possible commands that can be sent to a USB device. |
| URS_CONFIG | Contains pointers to event callback functions implemented by the URS client driver for a USB dual-role controller. Initialize this structure by calling URS_CONFIG_INIT. |
| USB_30_HUB_DESCRIPTOR | The USB_30_HUB_DESCRIPTOR structure contains a SuperSpeed hub descriptor. For information about the structure members, see Universal Serial Bus Revision 3.0 Specification, 10.13.2.1 Hub Descriptor, Table 10-3. SuperSpeed Hub Descriptor. |
| USB_BUS_INFORMATION_LEVEL_0 | The USB_BUS_INFORMATION_LEVEL_0 structure is used in conjunction with the QueryBusInformation interface routine to report information about the bus. |
| USB_BUS_INFORMATION_LEVEL_1 | The USB_BUS_INFORMATION_LEVEL_1 structure is used in conjunction with the QueryBusInformation interface routine to report information about the bus. |
| USB_BUS_INTERFACE_USBDI_V0 | The USB_BUS_INTERFACE_USBDI_V0 structure is provided by the USB hub driver to allow USB clients to make direct calls to the hub driver without allocating IRPs. |
| USB_BUS_INTERFACE_USBDI_V1 | The USB_BUS_INTERFACE_USBDI_V1 structure is provided by the USB hub driver to allow USB clients to make direct calls to the hub driver without allocating IRPs. |
| USB_BUS_INTERFACE_USBDI_V2 | The USB_BUS_INTERFACE_USBDI_V2 structure is provided by the USB hub driver to allow USB clients to make direct calls to the hub driver without allocating IRPs. |
| USB_BUS_INTERFACE_USBDI_V3 | The USB_BUS_INTERFACE_USBDI_V3 structure is provided by the USB hub driver to allow USB clients to make direct calls to the hub driver without allocating IRPs. |
| USB_COMMON_DESCRIPTOR | The USB_COMMON_DESCRIPTOR structure contains the head of the first descriptor that matches the search criteria in a call to USBD_ParseDescriptors. |
| USB_CONFIGURATION_DESCRIPTOR | The USB_CONFIGURATION_DESCRIPTOR structure is used by USB client drivers to hold a USB-defined configuration descriptor. |
| USB_CYCLE_PORT_PARAMS | The USB_CYCLE_PORT_PARAMS structure is used with the IOCTL_USB_HUB_CYCLE_PORT I/O control request to power cycle the port that is associated with the PDO that receives the request. |
| USB_DESCRIPTOR_REQUEST | The USB_DESCRIPTOR_REQUEST structure is used with the IOCTL_USB_GET_DESCRIPTOR_FROM_NODE_CONNECTION I/O control request to retrieve one or more descriptors for the device that is associated with the indicated connection index. |
| USB_DEVICE_CHARACTERISTICS | Contains information about the USB device’s characteristics, such as the maximum send and receive delays for any request. This structure is used in the IOCTL_USB_GET_DEVICE_CHARACTERISTICS request. |
| USB_DEVICE_DESCRIPTOR | The USB_DEVICE_DESCRIPTOR structure is used by USB client drivers to retrieve a USB-defined device descriptor. |
| USB_DEVICE_PORT_PATH | Contains the port path of a USB device. |
| USB_DEVICE_QUALIFIER_DESCRIPTOR | The USB_DEVICE_QUALIFIER_DESCRIPTOR structure is used by USB client drivers to retrieve a USB-defined device qualifier descriptor. |
| USB_ENDPOINT_DESCRIPTOR | The USB_ENDPOINT_DESCRIPTOR structure is used by USB client drivers to retrieve a USB-defined endpoint descriptor. |
| USB_FRAME_NUMBER_AND_QPC_FOR_TIME_SYNC_INFORMATION | Stores the frame and microframe numbers and the calculated system QPC values. This structure is used in the IOCTL_USB_GET_FRAME_NUMBER_AND_QPC_FOR_TIME_SYNC request. |
| USB_HCD_DRIVERKEY_NAME | The USB_HCD_DRIVERKEY_NAME structure is used with the IOCTL_GET_HCD_DRIVERKEY_NAME I/O control request to retrieve the driver key in the registry for the USB host controller driver. |
| USB_HUB_CAP_FLAGS | The USB_HUB_CAP_FLAGS structure is used to report the capabilities of a hub. |
| USB_HUB_CAPABILITIES | The USB_HUB_CAPABILITIES structure has been deprecated. Use USB_HUB_CAPABILITIES_EX instead. |
| USB_HUB_CAPABILITIES_EX | The USB_HUB_CAPABILITIES_EX structure is used with the IOCTL_USB_GET_HUB_CAPABILITIES I/O control request to retrieve the capabilities of a particular USB hub. |
| USB_HUB_DESCRIPTOR | The USB_HUB_DESCRIPTOR structure contains a hub descriptor. |
| USB_HUB_INFORMATION | The USB_HUB_INFORMATION structure contains information about a hub. |
| USB_HUB_INFORMATION_EX | The USB_HUB_INFORMATION_EX structure is used with the IOCTL_USB_GET_HUB_INFORMATION_EX I/O control request to retrieve information about a Universal Serial Bus (USB) hub. |
| USB_HUB_NAME | The USB_HUB_NAME structure stores the hub's symbolic device name. |
| USB_ID_STRING | The USB_ID_STRING structure is used to store a string or multi-string. |
| USB_INTERFACE_DESCRIPTOR | The USB_INTERFACE_DESCRIPTOR structure is used by USB client drivers to retrieve a USB-defined interface descriptor. |
| USB_MI_PARENT_INFORMATION | The USB_MI_PARENT_INFORMATION structure contains information about a composite device. |
| USB_NODE_CONNECTION_ATTRIBUTES | The USB_NODE_CONNECTION_ATTRIBUTES structure is used with the IOCTL_USB_GET_NODE_CONNECTION_ATTRIBUTES I/O control request to retrieve the attributes of a connection. |
| USB_NODE_CONNECTION_DRIVERKEY_NAME | The USB_NODE_CONNECTION_DRIVERKEY_NAME structure is used with the IOCTL_USB_GET_NODE_CONNECTION_DRIVERKEY_NAME I/O control request to retrieve the driver key name for the device that is connected to the indicated port. |
| USB_NODE_CONNECTION_INFORMATION | The USB_NODE_CONNECTION_INFORMATION structure is used with the IOCTL_USB_GET_NODE_CONNECTION_INFORMATION request to retrieve information about a USB port and connected device. |
| USB_NODE_CONNECTION_INFORMATION_EX | The USB_NODE_CONNECTION_INFORMATION_EX structure is used in conjunction with the IOCTL_USB_GET_NODE_CONNECTION_INFORMATION_EX request to obtain information about the connection associated with the indicated USB port. |
| USB_NODE_CONNECTION_INFORMATION_EX_V2 | The USB_NODE_CONNECTION_INFORMATION_EX_V2 structure is used with the IOCTL_USB_GET_NODE_CONNECTION_INFORMATION_EX_V2 I/O control request to retrieve speed information about a Universal Serial Bus (USB) device that is attached to a particular port. |
| USB_NODE_CONNECTION_INFORMATION_EX_V2_FLAGS | The USB_NODE_CONNECTION_INFORMATION_EX_V2_FLAGS union is used to indicate the speed at which a USB 3.0 device is currently operating and whether it can operate at higher speed, when attached to a particular port. |
| USB_NODE_CONNECTION_NAME | The USB_NODE_CONNECTION_NAME structure is used with the IOCTL_USB_GET_NODE_CONNECTION_NAME I/O control request to retrieve the symbolic link of the downstream hub that is attached to the port. |
| USB_NODE_INFORMATION | The USB_NODE_INFORMATION structure is used with the IOCTL_USB_GET_NODE_INFORMATION I/O control request to retrieve information about a parent device. |
| USB_PIPE_INFO | The USB_PIPE_INFO structure is used in conjunction with the USB_NODE_CONNECTION_INFORMATION_EX structure and the IOCTL_USB_GET_NODE_CONNECTION_INFORMATION_EX request to obtain information about a connection and its associated pipes. |
| USB_PORT_CONNECTOR_PROPERTIES | The USB_PORT_CONNECTOR_PROPERTIES structure is used with the IOCTL_USB_GET_PORT_CONNECTOR_PROPERTIES I/O control request to retrieve information about a port on a particular SuperSpeed hub. |
| USB_PORT_PROPERTIES | The USB_PORT_PROPERTIES union is used to report the capabilities of a Universal Serial Bus (USB) port.The port capabilities are retrieved in the USB_PORT_CONNECTOR_PROPERTIES structure by the IOCTL_USB_GET_PORT_CONNECTOR_PROPERTIES I/O control request. |
| USB_PROTOCOLS | The USB_PROTOCOLS union is used to report the Universal Serial Bus (USB) signaling protocols that are supported by the port. |
| USB_ROOT_HUB_NAME | The USB_ROOT_HUB_NAME structure stores the root hub's symbolic device name. |
| USB_START_TRACKING_FOR_TIME_SYNC_INFORMATION | The input and output buffer for the IOCTL_USB_START_TRACKING_FOR_TIME_SYNC request. |
| USB_STOP_TRACKING_FOR_TIME_SYNC_INFORMATION | The input buffer for the IOCTL_USB_STOP_TRACKING_FOR_TIME_SYNC request. |
| USB_STRING_DESCRIPTOR | The USB_STRING_DESCRIPTOR structure is used by USB client drivers to hold a USB-defined string descriptor. |
| USB_SUPERSPEED_ENDPOINT_COMPANION_DESCRIPTOR | The USB_SUPERSPEED_ENDPOINT_COMPANION_DESCRIPTOR structure is used by USB client drivers to retrieve a USB-defined SuperSpeed Endpoint Companion descriptor. For more information, see section 9.6.7 and Table 9-20 in the official USB 3.0 specification. |
| USB_TOPOLOGY_ADDRESS | The USB_TOPOLOGY_ADDRESS structure is used with the IOCTL_INTERNAL_USB_GET_TOPOLOGY_ADDRESS I/O request to retrieve information about a USB device?s location in the USB device tree. |
| USB_TRANSPORT_CHARACTERISTICS | Stores the transport characteristics at relevant points in time. This structure is used in the IOCTL_USB_GET_TRANSPORT_CHARACTERISTICS request. |
| USB_TRANSPORT_CHARACTERISTICS_CHANGE_NOTIFICATION | Contains registration information filled when the IOCTL_USB_REGISTER_FOR_TRANSPORT_CHARACTERISTICS_CHANGE request completes. |
| USB_TRANSPORT_CHARACTERISTICS_CHANGE_REGISTRATION | Contains registration information for the IOCTL_USB_REGISTER_FOR_TRANSPORT_CHARACTERISTICS_CHANGE request. |
| USB_TRANSPORT_CHARACTERISTICS_CHANGE_UNREGISTRATION | Contains unregistration information for the IOCTL_USB_UNREGISTER_FOR_TRANSPORT_CHARACTERISTICS_CHANGE request. |
| USBC_DEVICE_CONFIGURATION_INTERFACE_V1 | The USBC_DEVICE_CONFIGURATION_INTERFACE_V1 structure is exposed by the vendor-supplied filter drivers to assist the USB generic parent driver in defining interface collections. |
| USBC_FUNCTION_DESCRIPTOR | The USBC_FUNCTION_DESCRIPTOR structure describes a USB function and its associated interface collection. |
| USBD_ENDPOINT_OFFLOAD_INFORMATION | Stores xHCI-specific information that is used by client drivers to transfer data to and from the offloaded endpoints. |
| USBD_INTERFACE_INFORMATION | The USBD_INTERFACE_INFORMATION structure holds information about an interface for a configuration on a USB device. |
| USBD_INTERFACE_LIST_ENTRY | The USBD_INTERFACE_LIST_ENTRY structure is used by USB client drivers to create an array of interfaces to be inserted into a configuration request. |
| USBD_ISO_PACKET_DESCRIPTOR | The USBD_ISO_PACKET_DESCRIPTOR structure is used by USB client drivers to describe an isochronous transfer packet. |
| USBD_PIPE_INFORMATION | The USBD_PIPE_INFORMATION structure is used by USB client drivers to hold information about a pipe from a specific interface. |
| USBD_STREAM_INFORMATION | The USBD_STREAM_INFORMATION structure stores information about a stream associated with a bulk endpoint. |
| USBD_VERSION_INFORMATION | The USBD_VERSION_INFORMATION structure is used by the GetUSBDIVersion function to report its output data. |
| USBDEVICE_ABORTIO | Contains a handle for the Universal Serial Bus (USB) hub or device for which to abort data transfers. |
| USBDEVICE_ADDRESS | Contains parameters for a request to transition the specified device to the Addressed state. This structure is passed by UCX in request parameters (Parameters.Others.Arg1) of a framework request object of the EVT_UCX_USBDEVICE_ADDRESS callback function. |
| USBDEVICE_DISABLE | Contains parameters for a request to disable the specified device. This structure is passed by UCX in request parameters (Parameters.Others.Arg1) of a framework request object of the EVT_UCX_USBDEVICE_DISABLE callback function. |
| USBDEVICE_ENABLE | Contains parameters for a request to enable the specified device. This structure is passed by UCX in request parameters (Parameters.Others.Arg1) of a framework request object of the EVT_UCX_USBDEVICE_ENABLE callback function. |
| USBDEVICE_ENABLE_FAILURE_FLAGS | The flags that are set by the client driver in the EVT_UCX_USBDEVICE_ENABLE callback function. Indicate errors, if any, that might have occurred while enabling the device. |
| USBDEVICE_HUB_INFO | Contains parameters for a request to get information about the specified hub. This structure is passed by UCX in request parameters (Parameters.Others.Arg1) of a framework request object of the EVT_UCX_USBDEVICE_HUB_INFO callback function. |
| USBDEVICE_MGMT_HEADER | This structure provides a handle for the Universal Serial Bus (USB) hub or device physically connected to the bus. |
| USBDEVICE_PURGEIO | The USBDEVICE_PURGEIO structure contains the handle for the Universal Serial Bus (USB) hub or device to purge I/O for. |
| USBDEVICE_RESET | Contains parameters for a request to reset the specified device. This structure is passed by UCX in request parameters (Parameters.Others.Arg1) of a framework request object of the EVT_UCX_USBDEVICE_RESET callback function. |
| USBDEVICE_STARTIO | Contains a handle for the Universal Serial Bus (USB) hub or device on which to start data transfer. |
| USBDEVICE_TREE_PURGEIO | This structure provides the handle for the Universal Serial Bus (USB) device tree to purge I/O for. |
| USBDEVICE_UPDATE | Passed by UCX to update the specified device. This structure is in the request parameters (Parameters.Others.Arg1) of a framework request object passed in the EVT_UCX_USBDEVICE_UPDATE callback function. |
| USBDEVICE_UPDATE_20_HARDWARE_LPM_PARAMETERS | Contains parameters for a request to update USB 2.0 link power management (LPM). UCX passes this structure in the EVT_UCX_USBDEVICE_UPDATE callback function. |
| USBDEVICE_UPDATE_FAILURE_FLAGS | The flags that are set by the client driver in the EVT_UCX_USBDEVICE_UPDATE callback function. Indicate errors, if any, that might have occurred while updating the device. |
| USBDEVICE_UPDATE_FLAGS | Contains request flags set by UCX that is passed in the USBDEVICE_UPDATE structure when UCX invokes the client driver's EVT_UCX_USBDEVICE_UPDATE callback function. |
| USBFN_BUS_CONFIGURATION_INFO | Configuration packet that stores information about an available USB configuration. |
| USBFN_CLASS_INFORMATION_PACKET | Describes device interface class information associated with a USB interface. This structure can only hold information about a single function interface. |
| USBFN_CLASS_INFORMATION_PACKET_EX | Describes device interface class information associated with a USB interface. This structure can be used to describe single and multi-interface functions. |
| USBFN_CLASS_INTERFACE | Describes an interface and its endpoints. |
| USBFN_CLASS_INTERFACE_EX | Describes an interface and its endpoints. |
| USBFN_INTERFACE_ATTACH | Stores pointers to driver-implemented callback functions for handling attach and detach operations. |
| USBFN_INTERFACE_INFO | Describes an interface and its endpoints. |
| USBFN_NOTIFICATION | Describes information about a Universal Serial Bus (USB) event notification that was received by using IOCTL_INTERNAL_USBFN_BUS_EVENT_NOTIFICATION. |
| USBFN_ON_ATTACH | Describes the detected port type and attach action. |
| USBFN_PIPE_INFORMATION | Describes attributes of a pipe associated with an endpoint on a specific interface. |
| USBFN_POWER_FILTER_STATE | Reserved. Do not use. |
| USBFN_USB_STRING | Describes a USB string descriptor and the associated string index. |
| USBPM_ASSIGN_CONNECTOR_POWER_LEVEL_PARAMS | Describes the parameters for the UsbPm_AssignConnectorPowerLevel. |
| USBPM_CLIENT_CONFIG | The configuration structure used in the registering the client driver with the Policy Manager |
| USBPM_CLIENT_CONFIG_EXTRA_INFO | Contains optional information used to configure the client driver's registration. |
| USBPM_CONNECTOR_PROPERTIES | Describes the properties of a connector. |
| USBPM_CONNECTOR_STATE | Describes the state of a connector. |
| USBPM_EVENT_CALLBACK_PARAMS | Contains the details of the events related to changes in policy manager arrival/removal, hub arrival/removal or connector state change. |
| USBPM_HUB_CONNECTOR_HANDLES | Stores the connector handles for all connectors on a hub. |
| USBPM_HUB_PROPERTIES | Properties of a connector hub. |